struct Connection<Out, In> {
msg_tx: Sender<Out>,
msg_rx: Receiver<In>,
error_rx: Receiver<String>,
_tasks: [AbortOnDropHandle<()>; 2],
}
Expand description
An active CTP connection.
This type encapsulates the core connection logic. It is used by both the client and the server
implementation, with swapped Out
/In
types.
Each connection spawns two tasks:
- The send task is responsible for encoding and sending enqueued messages.
- The recv task is responsible for receiving and decoding messages from the peer.
The separation into tasks provides some performance isolation between the sending and the receiving half of the connection.
Fields§
§msg_tx: Sender<Out>
Message sender connected to the send task.
msg_rx: Receiver<In>
Message receiver connected to the receive task.
error_rx: Receiver<String>
Receiver for errors encountered by connection tasks.
_tasks: [AbortOnDropHandle<()>; 2]
Handles to connection tasks.
Implementations§
Source§impl<Out: Message, In: Message> Connection<Out, In>
impl<Out: Message, In: Message> Connection<Out, In>
Sourceconst KEEPALIVE_INTERVAL: Duration
const KEEPALIVE_INTERVAL: Duration
The interval with which keepalives are emitted on idle connections.
Sourceconst MIN_TIMEOUT: Duration
const MIN_TIMEOUT: Duration
The minimum acceptable idle timeout.
We want this to be significantly greater than KEEPALIVE_INTERVAL
, to avoid connections
getting canceled unnecessarily.
Sourceasync fn start(
stream: Stream,
version: Version,
server_fqdn: Option<String>,
timeout: Duration,
metrics: impl Metrics<Out, In>,
) -> Result<Self>
async fn start( stream: Stream, version: Version, server_fqdn: Option<String>, timeout: Duration, metrics: impl Metrics<Out, In>, ) -> Result<Self>
Start a new connection wrapping the given stream.
Sourceasync fn collect_error(&mut self) -> String
async fn collect_error(&mut self) -> String
Return a connection error.
Sourceasync fn run_send_task<W: AsyncWrite + Unpin>(
writer: W,
msg_rx: Receiver<Out>,
error_tx: Sender<String>,
metrics: impl Metrics<Out, In>,
)
async fn run_send_task<W: AsyncWrite + Unpin>( writer: W, msg_rx: Receiver<Out>, error_tx: Sender<String>, metrics: impl Metrics<Out, In>, )
Run a connection’s send task.
Trait Implementations§
Auto Trait Implementations§
impl<Out, In> Freeze for Connection<Out, In>
impl<Out, In> !RefUnwindSafe for Connection<Out, In>
impl<Out, In> Send for Connection<Out, In>
impl<Out, In> Sync for Connection<Out, In>
impl<Out, In> Unpin for Connection<Out, In>
impl<Out, In> !UnwindSafe for Connection<Out, In>
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> FutureExt for T
impl<T> FutureExt for T
Source§fn with_context(self, otel_cx: Context) -> WithContext<Self>
fn with_context(self, otel_cx: Context) -> WithContext<Self>
Source§fn with_current_context(self) -> WithContext<Self>
fn with_current_context(self) -> WithContext<Self>
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> IntoRequest<T> for T
impl<T> IntoRequest<T> for T
Source§fn into_request(self) -> Request<T>
fn into_request(self) -> Request<T>
T
in a tonic::Request
Source§impl<T, U> OverrideFrom<Option<&T>> for Uwhere
U: OverrideFrom<T>,
impl<T, U> OverrideFrom<Option<&T>> for Uwhere
U: OverrideFrom<T>,
Source§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§impl<T> Pointable for T
impl<T> Pointable for T
Source§impl<T> PolicyExt for Twhere
T: ?Sized,
impl<T> PolicyExt for Twhere
T: ?Sized,
Source§impl<P, R> ProtoType<R> for Pwhere
R: RustType<P>,
impl<P, R> ProtoType<R> for Pwhere
R: RustType<P>,
Source§fn into_rust(self) -> Result<R, TryFromProtoError>
fn into_rust(self) -> Result<R, TryFromProtoError>
RustType::from_proto
.Source§fn from_rust(rust: &R) -> P
fn from_rust(rust: &R) -> P
RustType::into_proto
.Source§impl<'a, S, T> Semigroup<&'a S> for Twhere
T: Semigroup<S>,
impl<'a, S, T> Semigroup<&'a S> for Twhere
T: Semigroup<S>,
Source§fn plus_equals(&mut self, rhs: &&'a S)
fn plus_equals(&mut self, rhs: &&'a S)
std::ops::AddAssign
, for types that do not implement AddAssign
.