Struct CertificateSpec

Source
pub struct CertificateSpec {
Show 22 fields pub additional_output_formats: Option<Vec<CertificateAdditionalOutputFormats>>, pub common_name: Option<String>, pub dns_names: Option<Vec<String>>, pub duration: Option<String>, pub email_addresses: Option<Vec<String>>, pub encode_usages_in_request: Option<bool>, pub ip_addresses: Option<Vec<String>>, pub is_ca: Option<bool>, pub issuer_ref: CertificateIssuerRef, pub keystores: Option<CertificateKeystores>, pub literal_subject: Option<String>, pub name_constraints: Option<CertificateNameConstraints>, pub other_names: Option<Vec<CertificateOtherNames>>, pub private_key: Option<CertificatePrivateKey>, pub renew_before: Option<String>, pub renew_before_percentage: Option<i32>, pub revision_history_limit: Option<i32>, pub secret_name: String, pub secret_template: Option<CertificateSecretTemplate>, pub subject: Option<CertificateSubject>, pub uris: Option<Vec<String>>, pub usages: Option<Vec<String>>,
}
Expand description

Specification of the desired state of the Certificate resource. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

Fields§

§additional_output_formats: Option<Vec<CertificateAdditionalOutputFormats>>

Defines extra output formats of the private key and signed certificate chain to be written to this Certificate’s target Secret.

This is a Beta Feature enabled by default. It can be disabled with the --feature-gates=AdditionalCertificateOutputFormats=false option set on both the controller and webhook components.

§common_name: Option<String>

Requested common name X509 certificate subject attribute. More info: https://datatracker.ietf.org/doc/html/rfc5280#section-4.1.2.6 NOTE: TLS clients will ignore this value when any subject alternative name is set (see https://tools.ietf.org/html/rfc6125#section-6.4.4).

Should have a length of 64 characters or fewer to avoid generating invalid CSRs. Cannot be set if the literalSubject field is set.

§dns_names: Option<Vec<String>>

Requested DNS subject alternative names.

§duration: Option<String>

Requested ‘duration’ (i.e. lifetime) of the Certificate. Note that the issuer may choose to ignore the requested duration, just like any other requested attribute.

If unset, this defaults to 90 days. Minimum accepted duration is 1 hour. Value must be in units accepted by Go time.ParseDuration https://golang.org/pkg/time/#ParseDuration.

§email_addresses: Option<Vec<String>>

Requested email subject alternative names.

§encode_usages_in_request: Option<bool>

Whether the KeyUsage and ExtKeyUsage extensions should be set in the encoded CSR.

This option defaults to true, and should only be disabled if the target issuer does not support CSRs with these X509 KeyUsage/ ExtKeyUsage extensions.

§ip_addresses: Option<Vec<String>>

Requested IP address subject alternative names.

§is_ca: Option<bool>

Requested basic constraints isCA value. The isCA value is used to set the isCA field on the created CertificateRequest resources. Note that the issuer may choose to ignore the requested isCA value, just like any other requested attribute.

If true, this will automatically add the cert sign usage to the list of requested usages.

§issuer_ref: CertificateIssuerRef

Reference to the issuer responsible for issuing the certificate. If the issuer is namespace-scoped, it must be in the same namespace as the Certificate. If the issuer is cluster-scoped, it can be used from any namespace.

The name field of the reference must always be specified.

§keystores: Option<CertificateKeystores>

Additional keystore output formats to be stored in the Certificate’s Secret.

§literal_subject: Option<String>

Requested X.509 certificate subject, represented using the LDAP “String Representation of a Distinguished Name” [1]. Important: the LDAP string format also specifies the order of the attributes in the subject, this is important when issuing certs for LDAP authentication. Example: CN=foo,DC=corp,DC=example,DC=com More info [1]: https://datatracker.ietf.org/doc/html/rfc4514 More info: https://github.com/cert-manager/cert-manager/issues/3203 More info: https://github.com/cert-manager/cert-manager/issues/4424

Cannot be set if the subject or commonName field is set.

§name_constraints: Option<CertificateNameConstraints>

x.509 certificate NameConstraint extension which MUST NOT be used in a non-CA certificate. More Info: https://datatracker.ietf.org/doc/html/rfc5280#section-4.2.1.10

This is an Alpha Feature and is only enabled with the --feature-gates=NameConstraints=true option set on both the controller and webhook components.

§other_names: Option<Vec<CertificateOtherNames>>

otherNames is an escape hatch for SAN that allows any type. We currently restrict the support to string like otherNames, cf RFC 5280 p 37 Any UTF8 String valued otherName can be passed with by setting the keys oid: x.x.x.x and UTF8Value: somevalue for otherName. Most commonly this would be UPN set with oid: 1.3.6.1.4.1.311.20.2.3 You should ensure that any OID passed is valid for the UTF8String type as we do not explicitly validate this.

§private_key: Option<CertificatePrivateKey>

Private key options. These include the key algorithm and size, the used encoding and the rotation policy.

§renew_before: Option<String>

How long before the currently issued certificate’s expiry cert-manager should renew the certificate. For example, if a certificate is valid for 60 minutes, and renewBefore=10m, cert-manager will begin to attempt to renew the certificate 50 minutes after it was issued (i.e. when there are 10 minutes remaining until the certificate is no longer valid).

NOTE: The actual lifetime of the issued certificate is used to determine the renewal time. If an issuer returns a certificate with a different lifetime than the one requested, cert-manager will use the lifetime of the issued certificate.

If unset, this defaults to 1/3 of the issued certificate’s lifetime. Minimum accepted value is 5 minutes. Value must be in units accepted by Go time.ParseDuration https://golang.org/pkg/time/#ParseDuration. Cannot be set if the renewBeforePercentage field is set.

§renew_before_percentage: Option<i32>

renewBeforePercentage is like renewBefore, except it is a relative percentage rather than an absolute duration. For example, if a certificate is valid for 60 minutes, and renewBeforePercentage=25, cert-manager will begin to attempt to renew the certificate 45 minutes after it was issued (i.e. when there are 15 minutes (25%) remaining until the certificate is no longer valid).

NOTE: The actual lifetime of the issued certificate is used to determine the renewal time. If an issuer returns a certificate with a different lifetime than the one requested, cert-manager will use the lifetime of the issued certificate.

Value must be an integer in the range (0,100). The minimum effective renewBefore derived from the renewBeforePercentage and duration fields is 5 minutes. Cannot be set if the renewBefore field is set.

§revision_history_limit: Option<i32>

The maximum number of CertificateRequest revisions that are maintained in the Certificate’s history. Each revision represents a single CertificateRequest created by this Certificate, either when it was created, renewed, or Spec was changed. Revisions will be removed by oldest first if the number of revisions exceeds this number.

If set, revisionHistoryLimit must be a value of 1 or greater. If unset (nil), revisions will not be garbage collected. Default value is nil.

§secret_name: String

Name of the Secret resource that will be automatically created and managed by this Certificate resource. It will be populated with a private key and certificate, signed by the denoted issuer. The Secret resource lives in the same namespace as the Certificate resource.

§secret_template: Option<CertificateSecretTemplate>

Defines annotations and labels to be copied to the Certificate’s Secret. Labels and annotations on the Secret will be changed as they appear on the SecretTemplate when added or removed. SecretTemplate annotations are added in conjunction with, and cannot overwrite, the base set of annotations cert-manager sets on the Certificate’s Secret.

§subject: Option<CertificateSubject>

Requested set of X509 certificate subject attributes. More info: https://datatracker.ietf.org/doc/html/rfc5280#section-4.1.2.6

The common name attribute is specified separately in the commonName field. Cannot be set if the literalSubject field is set.

§uris: Option<Vec<String>>

Requested URI subject alternative names.

§usages: Option<Vec<String>>

Requested key usages and extended key usages. These usages are used to set the usages field on the created CertificateRequest resources. If encodeUsagesInRequest is unset or set to true, the usages will additionally be encoded in the request field which contains the CSR blob.

If unset, defaults to digital signature and key encipherment.

Trait Implementations§

Source§

impl Clone for CertificateSpec

Source§

fn clone(&self) -> CertificateSpec

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for CertificateSpec

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for CertificateSpec

Source§

fn default() -> CertificateSpec

Returns the “default value” for a type. Read more
Source§

impl<'de> Deserialize<'de> for CertificateSpec

Source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
Source§

impl JsonSchema for CertificateSpec

Source§

fn schema_name() -> String

The name of the generated JSON Schema. Read more
Source§

fn schema_id() -> Cow<'static, str>

Returns a string that uniquely identifies the schema produced by this type. Read more
Source§

fn json_schema(generator: &mut SchemaGenerator) -> Schema

Generates a JSON Schema for this type. Read more
Source§

fn is_referenceable() -> bool

Whether JSON Schemas generated for this type should be re-used where possible using the $ref keyword. Read more
Source§

impl PartialEq for CertificateSpec

Source§

fn eq(&self, other: &CertificateSpec) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl Serialize for CertificateSpec

Source§

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more
Source§

impl StructuralPartialEq for CertificateSpec

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T, U> CastInto<U> for T
where U: CastFrom<T>,

Source§

fn cast_into(self) -> U

Performs the cast.
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> DynClone for T
where T: Clone,

Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> FromRef<T> for T
where T: Clone,

Source§

fn from_ref(input: &T) -> T

Converts to this type from a reference to the input type.
Source§

impl<T> FutureExt for T

Source§

fn with_context(self, otel_cx: Context) -> WithContext<Self>

Attaches the provided Context to this type, returning a WithContext wrapper. Read more
Source§

fn with_current_context(self) -> WithContext<Self>

Attaches the current Context to this type, returning a WithContext wrapper. Read more
Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<T> IntoRequest<T> for T

Source§

fn into_request(self) -> Request<T>

Wrap the input message T in a tonic::Request
Source§

impl<T, U> OverrideFrom<Option<&T>> for U
where U: OverrideFrom<T>,

Source§

fn override_from(self, layer: &Option<&T>) -> U

Override the configuration represented by Self with values from the given layer.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Pointable for T

Source§

const ALIGN: usize

The alignment of pointer.
Source§

type Init = T

The type for initializers.
Source§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
Source§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
Source§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
Source§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
Source§

impl<T> PolicyExt for T
where T: ?Sized,

Source§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns Action::Follow only if self and other return Action::Follow. Read more
Source§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns Action::Follow if either self or other returns Action::Follow. Read more
Source§

impl<P, R> ProtoType<R> for P
where R: RustType<P>,

Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<'a, S, T> Semigroup<&'a S> for T
where T: Semigroup<S>,

Source§

fn plus_equals(&mut self, rhs: &&'a S)

The method of std::ops::AddAssign, for types that do not implement AddAssign.
Source§

impl<T> ServiceExt for T

Source§

fn map_response_body<F>(self, f: F) -> MapResponseBody<Self, F>
where Self: Sized,

Apply a transformation to the response body. Read more
Source§

fn decompression(self) -> Decompression<Self>
where Self: Sized,

Decompress response bodies. Read more
Source§

fn trace_for_http(self) -> Trace<Self, SharedClassifier<ServerErrorsAsFailures>>
where Self: Sized,

High level tracing that classifies responses using HTTP status codes. Read more
Source§

fn trace_for_grpc(self) -> Trace<Self, SharedClassifier<GrpcErrorsAsFailures>>
where Self: Sized,

High level tracing that classifies responses using gRPC headers. Read more
Source§

fn follow_redirects(self) -> FollowRedirect<Self>
where Self: Sized,

Follow redirect resposes using the Standard policy. Read more
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

Source§

fn vzip(self) -> V

Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> Allocation for T
where T: RefUnwindSafe + Send + Sync,

Source§

impl<T> Data for T
where T: Clone + 'static,

Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

Source§

impl<T> ExchangeData for T
where T: Data + Data,