#[non_exhaustive]
pub struct CreateMultipartUploadInput {
Show 30 fields pub acl: Option<ObjectCannedAcl>, pub bucket: Option<String>, pub cache_control: Option<String>, pub content_disposition: Option<String>, pub content_encoding: Option<String>, pub content_language: Option<String>, pub content_type: Option<String>, pub expires: Option<DateTime>, pub grant_full_control: Option<String>, pub grant_read: Option<String>, pub grant_read_acp: Option<String>, pub grant_write_acp: Option<String>, pub key: Option<String>, pub metadata: Option<HashMap<String, String>>, pub server_side_encryption: Option<ServerSideEncryption>, pub storage_class: Option<StorageClass>, pub website_redirect_location: Option<String>, pub sse_customer_algorithm: Option<String>, pub sse_customer_key: Option<String>, pub sse_customer_key_md5: Option<String>, pub ssekms_key_id: Option<String>, pub ssekms_encryption_context: Option<String>, pub bucket_key_enabled: Option<bool>, pub request_payer: Option<RequestPayer>, pub tagging: Option<String>, pub object_lock_mode: Option<ObjectLockMode>, pub object_lock_retain_until_date: Option<DateTime>, pub object_lock_legal_hold_status: Option<ObjectLockLegalHoldStatus>, pub expected_bucket_owner: Option<String>, pub checksum_algorithm: Option<ChecksumAlgorithm>,
}

Fields (Non-exhaustive)§

This struct is marked as non-exhaustive
Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.
§acl: Option<ObjectCannedAcl>

The canned ACL to apply to the object. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL in the Amazon S3 User Guide.

By default, all objects are private. Only the owner has full access control. When uploading an object, you can grant access permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the access control list (ACL) on the new object. For more information, see Using ACLs. One way to grant the permissions using the request headers is to specify a canned ACL with the x-amz-acl request header.

  • This functionality is not supported for directory buckets.

  • This functionality is not supported for Amazon S3 on Outposts.

§bucket: Option<String>

The name of the bucket where the multipart upload is initiated and where the object is uploaded.

Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3 (for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.

Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

Access points and Object Lambda access points are not supported by directory buckets.

S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

§cache_control: Option<String>

Specifies caching behavior along the request/reply chain.

§content_disposition: Option<String>

Specifies presentational information for the object.

§content_encoding: Option<String>

Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.

For directory buckets, only the aws-chunked value is supported in this header field.

§content_language: Option<String>

The language that the content is in.

§content_type: Option<String>

A standard MIME type describing the format of the object data.

§expires: Option<DateTime>

The date and time at which the object is no longer cacheable.

§grant_full_control: Option<String>

Specify access permissions explicitly to give the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.

By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.

You specify each grantee as a type=value pair, where the type is one of the following:

  • id – if the value specified is the canonical user ID of an Amazon Web Services account

  • uri – if you are granting permissions to a predefined group

  • emailAddress – if the value specified is the email address of an Amazon Web Services account

    Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:

    • US East (N. Virginia)

    • US West (N. California)

    • US West (Oregon)

    • Asia Pacific (Singapore)

    • Asia Pacific (Sydney)

    • Asia Pacific (Tokyo)

    • Europe (Ireland)

    • South America (São Paulo)

    For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.

For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:

x-amz-grant-read: id="11112222333", id="444455556666"

  • This functionality is not supported for directory buckets.

  • This functionality is not supported for Amazon S3 on Outposts.

§grant_read: Option<String>

Specify access permissions explicitly to allow grantee to read the object data and its metadata.

By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.

You specify each grantee as a type=value pair, where the type is one of the following:

  • id – if the value specified is the canonical user ID of an Amazon Web Services account

  • uri – if you are granting permissions to a predefined group

  • emailAddress – if the value specified is the email address of an Amazon Web Services account

    Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:

    • US East (N. Virginia)

    • US West (N. California)

    • US West (Oregon)

    • Asia Pacific (Singapore)

    • Asia Pacific (Sydney)

    • Asia Pacific (Tokyo)

    • Europe (Ireland)

    • South America (São Paulo)

    For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.

For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:

x-amz-grant-read: id="11112222333", id="444455556666"

  • This functionality is not supported for directory buckets.

  • This functionality is not supported for Amazon S3 on Outposts.

§grant_read_acp: Option<String>

Specify access permissions explicitly to allows grantee to read the object ACL.

By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.

You specify each grantee as a type=value pair, where the type is one of the following:

  • id – if the value specified is the canonical user ID of an Amazon Web Services account

  • uri – if you are granting permissions to a predefined group

  • emailAddress – if the value specified is the email address of an Amazon Web Services account

    Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:

    • US East (N. Virginia)

    • US West (N. California)

    • US West (Oregon)

    • Asia Pacific (Singapore)

    • Asia Pacific (Sydney)

    • Asia Pacific (Tokyo)

    • Europe (Ireland)

    • South America (São Paulo)

    For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.

For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:

x-amz-grant-read: id="11112222333", id="444455556666"

  • This functionality is not supported for directory buckets.

  • This functionality is not supported for Amazon S3 on Outposts.

§grant_write_acp: Option<String>

Specify access permissions explicitly to allows grantee to allow grantee to write the ACL for the applicable object.

By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.

You specify each grantee as a type=value pair, where the type is one of the following:

  • id – if the value specified is the canonical user ID of an Amazon Web Services account

  • uri – if you are granting permissions to a predefined group

  • emailAddress – if the value specified is the email address of an Amazon Web Services account

    Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:

    • US East (N. Virginia)

    • US West (N. California)

    • US West (Oregon)

    • Asia Pacific (Singapore)

    • Asia Pacific (Sydney)

    • Asia Pacific (Tokyo)

    • Europe (Ireland)

    • South America (São Paulo)

    For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.

For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:

x-amz-grant-read: id="11112222333", id="444455556666"

  • This functionality is not supported for directory buckets.

  • This functionality is not supported for Amazon S3 on Outposts.

§key: Option<String>

Object key for which the multipart upload is to be initiated.

§metadata: Option<HashMap<String, String>>

A map of metadata to store with the object in S3.

§server_side_encryption: Option<ServerSideEncryption>

The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).

For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported.

§storage_class: Option<StorageClass>

By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.

  • For directory buckets, only the S3 Express One Zone storage class is supported to store newly created objects.

  • Amazon S3 on Outposts only uses the OUTPOSTS Storage Class.

§website_redirect_location: Option<String>

If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.

This functionality is not supported for directory buckets.

§sse_customer_algorithm: Option<String>

Specifies the algorithm to use when encrypting the object (for example, AES256).

This functionality is not supported for directory buckets.

§sse_customer_key: Option<String>

Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header.

This functionality is not supported for directory buckets.

§sse_customer_key_md5: Option<String>

Specifies the 128-bit MD5 digest of the customer-provided encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

This functionality is not supported for directory buckets.

§ssekms_key_id: Option<String>

Specifies the ID (Key ID, Key ARN, or Key Alias) of the symmetric encryption customer managed key to use for object encryption.

This functionality is not supported for directory buckets.

§ssekms_encryption_context: Option<String>

Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.

This functionality is not supported for directory buckets.

§bucket_key_enabled: Option<bool>

Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.

Specifying this header with an object action doesn’t affect bucket-level settings for S3 Bucket Key.

This functionality is not supported for directory buckets.

§request_payer: Option<RequestPayer>

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

§tagging: Option<String>

The tag-set for the object. The tag-set must be encoded as URL Query parameters.

This functionality is not supported for directory buckets.

§object_lock_mode: Option<ObjectLockMode>

Specifies the Object Lock mode that you want to apply to the uploaded object.

This functionality is not supported for directory buckets.

§object_lock_retain_until_date: Option<DateTime>

Specifies the date and time when you want the Object Lock to expire.

This functionality is not supported for directory buckets.

§object_lock_legal_hold_status: Option<ObjectLockLegalHoldStatus>

Specifies whether you want to apply a legal hold to the uploaded object.

This functionality is not supported for directory buckets.

§expected_bucket_owner: Option<String>

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

§checksum_algorithm: Option<ChecksumAlgorithm>

Indicates the algorithm that you want Amazon S3 to use to create the checksum for the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

Implementations§

source§

impl CreateMultipartUploadInput

source

pub fn acl(&self) -> Option<&ObjectCannedAcl>

The canned ACL to apply to the object. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL in the Amazon S3 User Guide.

By default, all objects are private. Only the owner has full access control. When uploading an object, you can grant access permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the access control list (ACL) on the new object. For more information, see Using ACLs. One way to grant the permissions using the request headers is to specify a canned ACL with the x-amz-acl request header.

  • This functionality is not supported for directory buckets.

  • This functionality is not supported for Amazon S3 on Outposts.

source

pub fn bucket(&self) -> Option<&str>

The name of the bucket where the multipart upload is initiated and where the object is uploaded.

Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3 (for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.

Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

Access points and Object Lambda access points are not supported by directory buckets.

S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

source

pub fn cache_control(&self) -> Option<&str>

Specifies caching behavior along the request/reply chain.

source

pub fn content_disposition(&self) -> Option<&str>

Specifies presentational information for the object.

source

pub fn content_encoding(&self) -> Option<&str>

Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.

For directory buckets, only the aws-chunked value is supported in this header field.

source

pub fn content_language(&self) -> Option<&str>

The language that the content is in.

source

pub fn content_type(&self) -> Option<&str>

A standard MIME type describing the format of the object data.

source

pub fn expires(&self) -> Option<&DateTime>

The date and time at which the object is no longer cacheable.

source

pub fn grant_full_control(&self) -> Option<&str>

Specify access permissions explicitly to give the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.

By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.

You specify each grantee as a type=value pair, where the type is one of the following:

  • id – if the value specified is the canonical user ID of an Amazon Web Services account

  • uri – if you are granting permissions to a predefined group

  • emailAddress – if the value specified is the email address of an Amazon Web Services account

    Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:

    • US East (N. Virginia)

    • US West (N. California)

    • US West (Oregon)

    • Asia Pacific (Singapore)

    • Asia Pacific (Sydney)

    • Asia Pacific (Tokyo)

    • Europe (Ireland)

    • South America (São Paulo)

    For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.

For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:

x-amz-grant-read: id="11112222333", id="444455556666"

  • This functionality is not supported for directory buckets.

  • This functionality is not supported for Amazon S3 on Outposts.

source

pub fn grant_read(&self) -> Option<&str>

Specify access permissions explicitly to allow grantee to read the object data and its metadata.

By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.

You specify each grantee as a type=value pair, where the type is one of the following:

  • id – if the value specified is the canonical user ID of an Amazon Web Services account

  • uri – if you are granting permissions to a predefined group

  • emailAddress – if the value specified is the email address of an Amazon Web Services account

    Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:

    • US East (N. Virginia)

    • US West (N. California)

    • US West (Oregon)

    • Asia Pacific (Singapore)

    • Asia Pacific (Sydney)

    • Asia Pacific (Tokyo)

    • Europe (Ireland)

    • South America (São Paulo)

    For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.

For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:

x-amz-grant-read: id="11112222333", id="444455556666"

  • This functionality is not supported for directory buckets.

  • This functionality is not supported for Amazon S3 on Outposts.

source

pub fn grant_read_acp(&self) -> Option<&str>

Specify access permissions explicitly to allows grantee to read the object ACL.

By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.

You specify each grantee as a type=value pair, where the type is one of the following:

  • id – if the value specified is the canonical user ID of an Amazon Web Services account

  • uri – if you are granting permissions to a predefined group

  • emailAddress – if the value specified is the email address of an Amazon Web Services account

    Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:

    • US East (N. Virginia)

    • US West (N. California)

    • US West (Oregon)

    • Asia Pacific (Singapore)

    • Asia Pacific (Sydney)

    • Asia Pacific (Tokyo)

    • Europe (Ireland)

    • South America (São Paulo)

    For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.

For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:

x-amz-grant-read: id="11112222333", id="444455556666"

  • This functionality is not supported for directory buckets.

  • This functionality is not supported for Amazon S3 on Outposts.

source

pub fn grant_write_acp(&self) -> Option<&str>

Specify access permissions explicitly to allows grantee to allow grantee to write the ACL for the applicable object.

By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.

You specify each grantee as a type=value pair, where the type is one of the following:

  • id – if the value specified is the canonical user ID of an Amazon Web Services account

  • uri – if you are granting permissions to a predefined group

  • emailAddress – if the value specified is the email address of an Amazon Web Services account

    Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:

    • US East (N. Virginia)

    • US West (N. California)

    • US West (Oregon)

    • Asia Pacific (Singapore)

    • Asia Pacific (Sydney)

    • Asia Pacific (Tokyo)

    • Europe (Ireland)

    • South America (São Paulo)

    For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.

For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:

x-amz-grant-read: id="11112222333", id="444455556666"

  • This functionality is not supported for directory buckets.

  • This functionality is not supported for Amazon S3 on Outposts.

source

pub fn key(&self) -> Option<&str>

Object key for which the multipart upload is to be initiated.

source

pub fn metadata(&self) -> Option<&HashMap<String, String>>

A map of metadata to store with the object in S3.

source

pub fn server_side_encryption(&self) -> Option<&ServerSideEncryption>

The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).

For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) is supported.

source

pub fn storage_class(&self) -> Option<&StorageClass>

By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.

  • For directory buckets, only the S3 Express One Zone storage class is supported to store newly created objects.

  • Amazon S3 on Outposts only uses the OUTPOSTS Storage Class.

source

pub fn website_redirect_location(&self) -> Option<&str>

If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.

This functionality is not supported for directory buckets.

source

pub fn sse_customer_algorithm(&self) -> Option<&str>

Specifies the algorithm to use when encrypting the object (for example, AES256).

This functionality is not supported for directory buckets.

source

pub fn sse_customer_key(&self) -> Option<&str>

Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header.

This functionality is not supported for directory buckets.

source

pub fn sse_customer_key_md5(&self) -> Option<&str>

Specifies the 128-bit MD5 digest of the customer-provided encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

This functionality is not supported for directory buckets.

source

pub fn ssekms_key_id(&self) -> Option<&str>

Specifies the ID (Key ID, Key ARN, or Key Alias) of the symmetric encryption customer managed key to use for object encryption.

This functionality is not supported for directory buckets.

source

pub fn ssekms_encryption_context(&self) -> Option<&str>

Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.

This functionality is not supported for directory buckets.

source

pub fn bucket_key_enabled(&self) -> Option<bool>

Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.

Specifying this header with an object action doesn’t affect bucket-level settings for S3 Bucket Key.

This functionality is not supported for directory buckets.

source

pub fn request_payer(&self) -> Option<&RequestPayer>

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

source

pub fn tagging(&self) -> Option<&str>

The tag-set for the object. The tag-set must be encoded as URL Query parameters.

This functionality is not supported for directory buckets.

source

pub fn object_lock_mode(&self) -> Option<&ObjectLockMode>

Specifies the Object Lock mode that you want to apply to the uploaded object.

This functionality is not supported for directory buckets.

source

pub fn object_lock_retain_until_date(&self) -> Option<&DateTime>

Specifies the date and time when you want the Object Lock to expire.

This functionality is not supported for directory buckets.

Specifies whether you want to apply a legal hold to the uploaded object.

This functionality is not supported for directory buckets.

source

pub fn expected_bucket_owner(&self) -> Option<&str>

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

source

pub fn checksum_algorithm(&self) -> Option<&ChecksumAlgorithm>

Indicates the algorithm that you want Amazon S3 to use to create the checksum for the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

source§

impl CreateMultipartUploadInput

source

pub fn builder() -> CreateMultipartUploadInputBuilder

Creates a new builder-style object to manufacture CreateMultipartUploadInput.

Trait Implementations§

source§

impl Clone for CreateMultipartUploadInput

source§

fn clone(&self) -> CreateMultipartUploadInput

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for CreateMultipartUploadInput

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl PartialEq for CreateMultipartUploadInput

source§

fn eq(&self, other: &CreateMultipartUploadInput) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl StructuralPartialEq for CreateMultipartUploadInput

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

source§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more