Struct aws_sdk_s3::operation::create_multipart_upload::builders::CreateMultipartUploadInputBuilder
source · #[non_exhaustive]pub struct CreateMultipartUploadInputBuilder { /* private fields */ }
Expand description
A builder for CreateMultipartUploadInput
.
Implementations§
source§impl CreateMultipartUploadInputBuilder
impl CreateMultipartUploadInputBuilder
sourcepub fn acl(self, input: ObjectCannedAcl) -> Self
pub fn acl(self, input: ObjectCannedAcl) -> Self
The canned ACL to apply to the object. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL in the Amazon S3 User Guide.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can grant access permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the access control list (ACL) on the new object. For more information, see Using ACLs. One way to grant the permissions using the request headers is to specify a canned ACL with the x-amz-acl
request header.
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn set_acl(self, input: Option<ObjectCannedAcl>) -> Self
pub fn set_acl(self, input: Option<ObjectCannedAcl>) -> Self
The canned ACL to apply to the object. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL in the Amazon S3 User Guide.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can grant access permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the access control list (ACL) on the new object. For more information, see Using ACLs. One way to grant the permissions using the request headers is to specify a canned ACL with the x-amz-acl
request header.
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn get_acl(&self) -> &Option<ObjectCannedAcl>
pub fn get_acl(&self) -> &Option<ObjectCannedAcl>
The canned ACL to apply to the object. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL in the Amazon S3 User Guide.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can grant access permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the access control list (ACL) on the new object. For more information, see Using ACLs. One way to grant the permissions using the request headers is to specify a canned ACL with the x-amz-acl
request header.
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn bucket(self, input: impl Into<String>) -> Self
pub fn bucket(self, input: impl Into<String>) -> Self
The name of the bucket where the multipart upload is initiated and where the object is uploaded.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3
(for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn set_bucket(self, input: Option<String>) -> Self
pub fn set_bucket(self, input: Option<String>) -> Self
The name of the bucket where the multipart upload is initiated and where the object is uploaded.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3
(for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn get_bucket(&self) -> &Option<String>
pub fn get_bucket(&self) -> &Option<String>
The name of the bucket where the multipart upload is initiated and where the object is uploaded.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3
(for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn cache_control(self, input: impl Into<String>) -> Self
pub fn cache_control(self, input: impl Into<String>) -> Self
Specifies caching behavior along the request/reply chain.
sourcepub fn set_cache_control(self, input: Option<String>) -> Self
pub fn set_cache_control(self, input: Option<String>) -> Self
Specifies caching behavior along the request/reply chain.
sourcepub fn get_cache_control(&self) -> &Option<String>
pub fn get_cache_control(&self) -> &Option<String>
Specifies caching behavior along the request/reply chain.
sourcepub fn content_disposition(self, input: impl Into<String>) -> Self
pub fn content_disposition(self, input: impl Into<String>) -> Self
Specifies presentational information for the object.
sourcepub fn set_content_disposition(self, input: Option<String>) -> Self
pub fn set_content_disposition(self, input: Option<String>) -> Self
Specifies presentational information for the object.
sourcepub fn get_content_disposition(&self) -> &Option<String>
pub fn get_content_disposition(&self) -> &Option<String>
Specifies presentational information for the object.
sourcepub fn content_encoding(self, input: impl Into<String>) -> Self
pub fn content_encoding(self, input: impl Into<String>) -> Self
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
For directory buckets, only the aws-chunked
value is supported in this header field.
sourcepub fn set_content_encoding(self, input: Option<String>) -> Self
pub fn set_content_encoding(self, input: Option<String>) -> Self
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
For directory buckets, only the aws-chunked
value is supported in this header field.
sourcepub fn get_content_encoding(&self) -> &Option<String>
pub fn get_content_encoding(&self) -> &Option<String>
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
For directory buckets, only the aws-chunked
value is supported in this header field.
sourcepub fn content_language(self, input: impl Into<String>) -> Self
pub fn content_language(self, input: impl Into<String>) -> Self
The language that the content is in.
sourcepub fn set_content_language(self, input: Option<String>) -> Self
pub fn set_content_language(self, input: Option<String>) -> Self
The language that the content is in.
sourcepub fn get_content_language(&self) -> &Option<String>
pub fn get_content_language(&self) -> &Option<String>
The language that the content is in.
sourcepub fn content_type(self, input: impl Into<String>) -> Self
pub fn content_type(self, input: impl Into<String>) -> Self
A standard MIME type describing the format of the object data.
sourcepub fn set_content_type(self, input: Option<String>) -> Self
pub fn set_content_type(self, input: Option<String>) -> Self
A standard MIME type describing the format of the object data.
sourcepub fn get_content_type(&self) -> &Option<String>
pub fn get_content_type(&self) -> &Option<String>
A standard MIME type describing the format of the object data.
sourcepub fn expires(self, input: DateTime) -> Self
pub fn expires(self, input: DateTime) -> Self
The date and time at which the object is no longer cacheable.
sourcepub fn set_expires(self, input: Option<DateTime>) -> Self
pub fn set_expires(self, input: Option<DateTime>) -> Self
The date and time at which the object is no longer cacheable.
sourcepub fn get_expires(&self) -> &Option<DateTime>
pub fn get_expires(&self) -> &Option<DateTime>
The date and time at which the object is no longer cacheable.
sourcepub fn grant_full_control(self, input: impl Into<String>) -> Self
pub fn grant_full_control(self, input: impl Into<String>) -> Self
Specify access permissions explicitly to give the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.
You specify each grantee as a type=value pair, where the type is one of the following:
-
id
– if the value specified is the canonical user ID of an Amazon Web Services account -
uri
– if you are granting permissions to a predefined group -
emailAddress
– if the value specified is the email address of an Amazon Web Services accountUsing email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:
-
US East (N. Virginia)
-
US West (N. California)
-
US West (Oregon)
-
Asia Pacific (Singapore)
-
Asia Pacific (Sydney)
-
Asia Pacific (Tokyo)
-
Europe (Ireland)
-
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.
-
For example, the following x-amz-grant-read
header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id="11112222333", id="444455556666"
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn set_grant_full_control(self, input: Option<String>) -> Self
pub fn set_grant_full_control(self, input: Option<String>) -> Self
Specify access permissions explicitly to give the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.
You specify each grantee as a type=value pair, where the type is one of the following:
-
id
– if the value specified is the canonical user ID of an Amazon Web Services account -
uri
– if you are granting permissions to a predefined group -
emailAddress
– if the value specified is the email address of an Amazon Web Services accountUsing email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:
-
US East (N. Virginia)
-
US West (N. California)
-
US West (Oregon)
-
Asia Pacific (Singapore)
-
Asia Pacific (Sydney)
-
Asia Pacific (Tokyo)
-
Europe (Ireland)
-
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.
-
For example, the following x-amz-grant-read
header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id="11112222333", id="444455556666"
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn get_grant_full_control(&self) -> &Option<String>
pub fn get_grant_full_control(&self) -> &Option<String>
Specify access permissions explicitly to give the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.
You specify each grantee as a type=value pair, where the type is one of the following:
-
id
– if the value specified is the canonical user ID of an Amazon Web Services account -
uri
– if you are granting permissions to a predefined group -
emailAddress
– if the value specified is the email address of an Amazon Web Services accountUsing email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:
-
US East (N. Virginia)
-
US West (N. California)
-
US West (Oregon)
-
Asia Pacific (Singapore)
-
Asia Pacific (Sydney)
-
Asia Pacific (Tokyo)
-
Europe (Ireland)
-
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.
-
For example, the following x-amz-grant-read
header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id="11112222333", id="444455556666"
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn grant_read(self, input: impl Into<String>) -> Self
pub fn grant_read(self, input: impl Into<String>) -> Self
Specify access permissions explicitly to allow grantee to read the object data and its metadata.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.
You specify each grantee as a type=value pair, where the type is one of the following:
-
id
– if the value specified is the canonical user ID of an Amazon Web Services account -
uri
– if you are granting permissions to a predefined group -
emailAddress
– if the value specified is the email address of an Amazon Web Services accountUsing email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:
-
US East (N. Virginia)
-
US West (N. California)
-
US West (Oregon)
-
Asia Pacific (Singapore)
-
Asia Pacific (Sydney)
-
Asia Pacific (Tokyo)
-
Europe (Ireland)
-
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.
-
For example, the following x-amz-grant-read
header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id="11112222333", id="444455556666"
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn set_grant_read(self, input: Option<String>) -> Self
pub fn set_grant_read(self, input: Option<String>) -> Self
Specify access permissions explicitly to allow grantee to read the object data and its metadata.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.
You specify each grantee as a type=value pair, where the type is one of the following:
-
id
– if the value specified is the canonical user ID of an Amazon Web Services account -
uri
– if you are granting permissions to a predefined group -
emailAddress
– if the value specified is the email address of an Amazon Web Services accountUsing email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:
-
US East (N. Virginia)
-
US West (N. California)
-
US West (Oregon)
-
Asia Pacific (Singapore)
-
Asia Pacific (Sydney)
-
Asia Pacific (Tokyo)
-
Europe (Ireland)
-
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.
-
For example, the following x-amz-grant-read
header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id="11112222333", id="444455556666"
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn get_grant_read(&self) -> &Option<String>
pub fn get_grant_read(&self) -> &Option<String>
Specify access permissions explicitly to allow grantee to read the object data and its metadata.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.
You specify each grantee as a type=value pair, where the type is one of the following:
-
id
– if the value specified is the canonical user ID of an Amazon Web Services account -
uri
– if you are granting permissions to a predefined group -
emailAddress
– if the value specified is the email address of an Amazon Web Services accountUsing email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:
-
US East (N. Virginia)
-
US West (N. California)
-
US West (Oregon)
-
Asia Pacific (Singapore)
-
Asia Pacific (Sydney)
-
Asia Pacific (Tokyo)
-
Europe (Ireland)
-
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.
-
For example, the following x-amz-grant-read
header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id="11112222333", id="444455556666"
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn grant_read_acp(self, input: impl Into<String>) -> Self
pub fn grant_read_acp(self, input: impl Into<String>) -> Self
Specify access permissions explicitly to allows grantee to read the object ACL.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.
You specify each grantee as a type=value pair, where the type is one of the following:
-
id
– if the value specified is the canonical user ID of an Amazon Web Services account -
uri
– if you are granting permissions to a predefined group -
emailAddress
– if the value specified is the email address of an Amazon Web Services accountUsing email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:
-
US East (N. Virginia)
-
US West (N. California)
-
US West (Oregon)
-
Asia Pacific (Singapore)
-
Asia Pacific (Sydney)
-
Asia Pacific (Tokyo)
-
Europe (Ireland)
-
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.
-
For example, the following x-amz-grant-read
header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id="11112222333", id="444455556666"
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn set_grant_read_acp(self, input: Option<String>) -> Self
pub fn set_grant_read_acp(self, input: Option<String>) -> Self
Specify access permissions explicitly to allows grantee to read the object ACL.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.
You specify each grantee as a type=value pair, where the type is one of the following:
-
id
– if the value specified is the canonical user ID of an Amazon Web Services account -
uri
– if you are granting permissions to a predefined group -
emailAddress
– if the value specified is the email address of an Amazon Web Services accountUsing email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:
-
US East (N. Virginia)
-
US West (N. California)
-
US West (Oregon)
-
Asia Pacific (Singapore)
-
Asia Pacific (Sydney)
-
Asia Pacific (Tokyo)
-
Europe (Ireland)
-
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.
-
For example, the following x-amz-grant-read
header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id="11112222333", id="444455556666"
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn get_grant_read_acp(&self) -> &Option<String>
pub fn get_grant_read_acp(&self) -> &Option<String>
Specify access permissions explicitly to allows grantee to read the object ACL.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.
You specify each grantee as a type=value pair, where the type is one of the following:
-
id
– if the value specified is the canonical user ID of an Amazon Web Services account -
uri
– if you are granting permissions to a predefined group -
emailAddress
– if the value specified is the email address of an Amazon Web Services accountUsing email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:
-
US East (N. Virginia)
-
US West (N. California)
-
US West (Oregon)
-
Asia Pacific (Singapore)
-
Asia Pacific (Sydney)
-
Asia Pacific (Tokyo)
-
Europe (Ireland)
-
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.
-
For example, the following x-amz-grant-read
header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id="11112222333", id="444455556666"
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn grant_write_acp(self, input: impl Into<String>) -> Self
pub fn grant_write_acp(self, input: impl Into<String>) -> Self
Specify access permissions explicitly to allows grantee to allow grantee to write the ACL for the applicable object.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.
You specify each grantee as a type=value pair, where the type is one of the following:
-
id
– if the value specified is the canonical user ID of an Amazon Web Services account -
uri
– if you are granting permissions to a predefined group -
emailAddress
– if the value specified is the email address of an Amazon Web Services accountUsing email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:
-
US East (N. Virginia)
-
US West (N. California)
-
US West (Oregon)
-
Asia Pacific (Singapore)
-
Asia Pacific (Sydney)
-
Asia Pacific (Tokyo)
-
Europe (Ireland)
-
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.
-
For example, the following x-amz-grant-read
header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id="11112222333", id="444455556666"
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn set_grant_write_acp(self, input: Option<String>) -> Self
pub fn set_grant_write_acp(self, input: Option<String>) -> Self
Specify access permissions explicitly to allows grantee to allow grantee to write the ACL for the applicable object.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.
You specify each grantee as a type=value pair, where the type is one of the following:
-
id
– if the value specified is the canonical user ID of an Amazon Web Services account -
uri
– if you are granting permissions to a predefined group -
emailAddress
– if the value specified is the email address of an Amazon Web Services accountUsing email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:
-
US East (N. Virginia)
-
US West (N. California)
-
US West (Oregon)
-
Asia Pacific (Singapore)
-
Asia Pacific (Sydney)
-
Asia Pacific (Tokyo)
-
Europe (Ireland)
-
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.
-
For example, the following x-amz-grant-read
header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id="11112222333", id="444455556666"
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn get_grant_write_acp(&self) -> &Option<String>
pub fn get_grant_write_acp(&self) -> &Option<String>
Specify access permissions explicitly to allows grantee to allow grantee to write the ACL for the applicable object.
By default, all objects are private. Only the owner has full access control. When uploading an object, you can use this header to explicitly grant access permissions to specific Amazon Web Services accounts or groups. This header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.
You specify each grantee as a type=value pair, where the type is one of the following:
-
id
– if the value specified is the canonical user ID of an Amazon Web Services account -
uri
– if you are granting permissions to a predefined group -
emailAddress
– if the value specified is the email address of an Amazon Web Services accountUsing email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:
-
US East (N. Virginia)
-
US West (N. California)
-
US West (Oregon)
-
Asia Pacific (Singapore)
-
Asia Pacific (Sydney)
-
Asia Pacific (Tokyo)
-
Europe (Ireland)
-
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.
-
For example, the following x-amz-grant-read
header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id="11112222333", id="444455556666"
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn key(self, input: impl Into<String>) -> Self
pub fn key(self, input: impl Into<String>) -> Self
Object key for which the multipart upload is to be initiated.
This field is required.sourcepub fn set_key(self, input: Option<String>) -> Self
pub fn set_key(self, input: Option<String>) -> Self
Object key for which the multipart upload is to be initiated.
sourcepub fn get_key(&self) -> &Option<String>
pub fn get_key(&self) -> &Option<String>
Object key for which the multipart upload is to be initiated.
sourcepub fn metadata(self, k: impl Into<String>, v: impl Into<String>) -> Self
pub fn metadata(self, k: impl Into<String>, v: impl Into<String>) -> Self
Adds a key-value pair to metadata
.
To override the contents of this collection use set_metadata
.
A map of metadata to store with the object in S3.
sourcepub fn set_metadata(self, input: Option<HashMap<String, String>>) -> Self
pub fn set_metadata(self, input: Option<HashMap<String, String>>) -> Self
A map of metadata to store with the object in S3.
sourcepub fn get_metadata(&self) -> &Option<HashMap<String, String>>
pub fn get_metadata(&self) -> &Option<HashMap<String, String>>
A map of metadata to store with the object in S3.
sourcepub fn server_side_encryption(self, input: ServerSideEncryption) -> Self
pub fn server_side_encryption(self, input: ServerSideEncryption) -> Self
The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256
, aws:kms
).
For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256
) is supported.
sourcepub fn set_server_side_encryption(
self,
input: Option<ServerSideEncryption>,
) -> Self
pub fn set_server_side_encryption( self, input: Option<ServerSideEncryption>, ) -> Self
The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256
, aws:kms
).
For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256
) is supported.
sourcepub fn get_server_side_encryption(&self) -> &Option<ServerSideEncryption>
pub fn get_server_side_encryption(&self) -> &Option<ServerSideEncryption>
The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256
, aws:kms
).
For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256
) is supported.
sourcepub fn storage_class(self, input: StorageClass) -> Self
pub fn storage_class(self, input: StorageClass) -> Self
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.
-
For directory buckets, only the S3 Express One Zone storage class is supported to store newly created objects.
-
Amazon S3 on Outposts only uses the OUTPOSTS Storage Class.
sourcepub fn set_storage_class(self, input: Option<StorageClass>) -> Self
pub fn set_storage_class(self, input: Option<StorageClass>) -> Self
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.
-
For directory buckets, only the S3 Express One Zone storage class is supported to store newly created objects.
-
Amazon S3 on Outposts only uses the OUTPOSTS Storage Class.
sourcepub fn get_storage_class(&self) -> &Option<StorageClass>
pub fn get_storage_class(&self) -> &Option<StorageClass>
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.
-
For directory buckets, only the S3 Express One Zone storage class is supported to store newly created objects.
-
Amazon S3 on Outposts only uses the OUTPOSTS Storage Class.
sourcepub fn website_redirect_location(self, input: impl Into<String>) -> Self
pub fn website_redirect_location(self, input: impl Into<String>) -> Self
If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.
This functionality is not supported for directory buckets.
sourcepub fn set_website_redirect_location(self, input: Option<String>) -> Self
pub fn set_website_redirect_location(self, input: Option<String>) -> Self
If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.
This functionality is not supported for directory buckets.
sourcepub fn get_website_redirect_location(&self) -> &Option<String>
pub fn get_website_redirect_location(&self) -> &Option<String>
If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.
This functionality is not supported for directory buckets.
sourcepub fn sse_customer_algorithm(self, input: impl Into<String>) -> Self
pub fn sse_customer_algorithm(self, input: impl Into<String>) -> Self
Specifies the algorithm to use when encrypting the object (for example, AES256).
This functionality is not supported for directory buckets.
sourcepub fn set_sse_customer_algorithm(self, input: Option<String>) -> Self
pub fn set_sse_customer_algorithm(self, input: Option<String>) -> Self
Specifies the algorithm to use when encrypting the object (for example, AES256).
This functionality is not supported for directory buckets.
sourcepub fn get_sse_customer_algorithm(&self) -> &Option<String>
pub fn get_sse_customer_algorithm(&self) -> &Option<String>
Specifies the algorithm to use when encrypting the object (for example, AES256).
This functionality is not supported for directory buckets.
sourcepub fn sse_customer_key(self, input: impl Into<String>) -> Self
pub fn sse_customer_key(self, input: impl Into<String>) -> Self
Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm
header.
This functionality is not supported for directory buckets.
sourcepub fn set_sse_customer_key(self, input: Option<String>) -> Self
pub fn set_sse_customer_key(self, input: Option<String>) -> Self
Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm
header.
This functionality is not supported for directory buckets.
sourcepub fn get_sse_customer_key(&self) -> &Option<String>
pub fn get_sse_customer_key(&self) -> &Option<String>
Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm
header.
This functionality is not supported for directory buckets.
sourcepub fn sse_customer_key_md5(self, input: impl Into<String>) -> Self
pub fn sse_customer_key_md5(self, input: impl Into<String>) -> Self
Specifies the 128-bit MD5 digest of the customer-provided encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
This functionality is not supported for directory buckets.
sourcepub fn set_sse_customer_key_md5(self, input: Option<String>) -> Self
pub fn set_sse_customer_key_md5(self, input: Option<String>) -> Self
Specifies the 128-bit MD5 digest of the customer-provided encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
This functionality is not supported for directory buckets.
sourcepub fn get_sse_customer_key_md5(&self) -> &Option<String>
pub fn get_sse_customer_key_md5(&self) -> &Option<String>
Specifies the 128-bit MD5 digest of the customer-provided encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
This functionality is not supported for directory buckets.
sourcepub fn ssekms_key_id(self, input: impl Into<String>) -> Self
pub fn ssekms_key_id(self, input: impl Into<String>) -> Self
Specifies the ID (Key ID, Key ARN, or Key Alias) of the symmetric encryption customer managed key to use for object encryption.
This functionality is not supported for directory buckets.
sourcepub fn set_ssekms_key_id(self, input: Option<String>) -> Self
pub fn set_ssekms_key_id(self, input: Option<String>) -> Self
Specifies the ID (Key ID, Key ARN, or Key Alias) of the symmetric encryption customer managed key to use for object encryption.
This functionality is not supported for directory buckets.
sourcepub fn get_ssekms_key_id(&self) -> &Option<String>
pub fn get_ssekms_key_id(&self) -> &Option<String>
Specifies the ID (Key ID, Key ARN, or Key Alias) of the symmetric encryption customer managed key to use for object encryption.
This functionality is not supported for directory buckets.
sourcepub fn ssekms_encryption_context(self, input: impl Into<String>) -> Self
pub fn ssekms_encryption_context(self, input: impl Into<String>) -> Self
Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
This functionality is not supported for directory buckets.
sourcepub fn set_ssekms_encryption_context(self, input: Option<String>) -> Self
pub fn set_ssekms_encryption_context(self, input: Option<String>) -> Self
Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
This functionality is not supported for directory buckets.
sourcepub fn get_ssekms_encryption_context(&self) -> &Option<String>
pub fn get_ssekms_encryption_context(&self) -> &Option<String>
Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
This functionality is not supported for directory buckets.
sourcepub fn bucket_key_enabled(self, input: bool) -> Self
pub fn bucket_key_enabled(self, input: bool) -> Self
Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). Setting this header to true
causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with an object action doesn’t affect bucket-level settings for S3 Bucket Key.
This functionality is not supported for directory buckets.
sourcepub fn set_bucket_key_enabled(self, input: Option<bool>) -> Self
pub fn set_bucket_key_enabled(self, input: Option<bool>) -> Self
Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). Setting this header to true
causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with an object action doesn’t affect bucket-level settings for S3 Bucket Key.
This functionality is not supported for directory buckets.
sourcepub fn get_bucket_key_enabled(&self) -> &Option<bool>
pub fn get_bucket_key_enabled(&self) -> &Option<bool>
Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). Setting this header to true
causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with an object action doesn’t affect bucket-level settings for S3 Bucket Key.
This functionality is not supported for directory buckets.
sourcepub fn request_payer(self, input: RequestPayer) -> Self
pub fn request_payer(self, input: RequestPayer) -> Self
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn set_request_payer(self, input: Option<RequestPayer>) -> Self
pub fn set_request_payer(self, input: Option<RequestPayer>) -> Self
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn get_request_payer(&self) -> &Option<RequestPayer>
pub fn get_request_payer(&self) -> &Option<RequestPayer>
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn tagging(self, input: impl Into<String>) -> Self
pub fn tagging(self, input: impl Into<String>) -> Self
The tag-set for the object. The tag-set must be encoded as URL Query parameters.
This functionality is not supported for directory buckets.
sourcepub fn set_tagging(self, input: Option<String>) -> Self
pub fn set_tagging(self, input: Option<String>) -> Self
The tag-set for the object. The tag-set must be encoded as URL Query parameters.
This functionality is not supported for directory buckets.
sourcepub fn get_tagging(&self) -> &Option<String>
pub fn get_tagging(&self) -> &Option<String>
The tag-set for the object. The tag-set must be encoded as URL Query parameters.
This functionality is not supported for directory buckets.
sourcepub fn object_lock_mode(self, input: ObjectLockMode) -> Self
pub fn object_lock_mode(self, input: ObjectLockMode) -> Self
Specifies the Object Lock mode that you want to apply to the uploaded object.
This functionality is not supported for directory buckets.
sourcepub fn set_object_lock_mode(self, input: Option<ObjectLockMode>) -> Self
pub fn set_object_lock_mode(self, input: Option<ObjectLockMode>) -> Self
Specifies the Object Lock mode that you want to apply to the uploaded object.
This functionality is not supported for directory buckets.
sourcepub fn get_object_lock_mode(&self) -> &Option<ObjectLockMode>
pub fn get_object_lock_mode(&self) -> &Option<ObjectLockMode>
Specifies the Object Lock mode that you want to apply to the uploaded object.
This functionality is not supported for directory buckets.
sourcepub fn object_lock_retain_until_date(self, input: DateTime) -> Self
pub fn object_lock_retain_until_date(self, input: DateTime) -> Self
Specifies the date and time when you want the Object Lock to expire.
This functionality is not supported for directory buckets.
sourcepub fn set_object_lock_retain_until_date(self, input: Option<DateTime>) -> Self
pub fn set_object_lock_retain_until_date(self, input: Option<DateTime>) -> Self
Specifies the date and time when you want the Object Lock to expire.
This functionality is not supported for directory buckets.
sourcepub fn get_object_lock_retain_until_date(&self) -> &Option<DateTime>
pub fn get_object_lock_retain_until_date(&self) -> &Option<DateTime>
Specifies the date and time when you want the Object Lock to expire.
This functionality is not supported for directory buckets.
sourcepub fn object_lock_legal_hold_status(
self,
input: ObjectLockLegalHoldStatus,
) -> Self
pub fn object_lock_legal_hold_status( self, input: ObjectLockLegalHoldStatus, ) -> Self
Specifies whether you want to apply a legal hold to the uploaded object.
This functionality is not supported for directory buckets.
sourcepub fn set_object_lock_legal_hold_status(
self,
input: Option<ObjectLockLegalHoldStatus>,
) -> Self
pub fn set_object_lock_legal_hold_status( self, input: Option<ObjectLockLegalHoldStatus>, ) -> Self
Specifies whether you want to apply a legal hold to the uploaded object.
This functionality is not supported for directory buckets.
sourcepub fn get_object_lock_legal_hold_status(
&self,
) -> &Option<ObjectLockLegalHoldStatus>
pub fn get_object_lock_legal_hold_status( &self, ) -> &Option<ObjectLockLegalHoldStatus>
Specifies whether you want to apply a legal hold to the uploaded object.
This functionality is not supported for directory buckets.
sourcepub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn get_expected_bucket_owner(&self) -> &Option<String>
pub fn get_expected_bucket_owner(&self) -> &Option<String>
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn checksum_algorithm(self, input: ChecksumAlgorithm) -> Self
pub fn checksum_algorithm(self, input: ChecksumAlgorithm) -> Self
Indicates the algorithm that you want Amazon S3 to use to create the checksum for the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn set_checksum_algorithm(self, input: Option<ChecksumAlgorithm>) -> Self
pub fn set_checksum_algorithm(self, input: Option<ChecksumAlgorithm>) -> Self
Indicates the algorithm that you want Amazon S3 to use to create the checksum for the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>
pub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>
Indicates the algorithm that you want Amazon S3 to use to create the checksum for the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn build(self) -> Result<CreateMultipartUploadInput, BuildError>
pub fn build(self) -> Result<CreateMultipartUploadInput, BuildError>
Consumes the builder and constructs a CreateMultipartUploadInput
.
source§impl CreateMultipartUploadInputBuilder
impl CreateMultipartUploadInputBuilder
sourcepub async fn send_with(
self,
client: &Client,
) -> Result<CreateMultipartUploadOutput, SdkError<CreateMultipartUploadError, HttpResponse>>
pub async fn send_with( self, client: &Client, ) -> Result<CreateMultipartUploadOutput, SdkError<CreateMultipartUploadError, HttpResponse>>
Sends a request with this input using the given client.
Trait Implementations§
source§impl Clone for CreateMultipartUploadInputBuilder
impl Clone for CreateMultipartUploadInputBuilder
source§fn clone(&self) -> CreateMultipartUploadInputBuilder
fn clone(&self) -> CreateMultipartUploadInputBuilder
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresource§impl Default for CreateMultipartUploadInputBuilder
impl Default for CreateMultipartUploadInputBuilder
source§fn default() -> CreateMultipartUploadInputBuilder
fn default() -> CreateMultipartUploadInputBuilder
source§impl PartialEq for CreateMultipartUploadInputBuilder
impl PartialEq for CreateMultipartUploadInputBuilder
source§fn eq(&self, other: &CreateMultipartUploadInputBuilder) -> bool
fn eq(&self, other: &CreateMultipartUploadInputBuilder) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for CreateMultipartUploadInputBuilder
Auto Trait Implementations§
impl Freeze for CreateMultipartUploadInputBuilder
impl RefUnwindSafe for CreateMultipartUploadInputBuilder
impl Send for CreateMultipartUploadInputBuilder
impl Sync for CreateMultipartUploadInputBuilder
impl Unpin for CreateMultipartUploadInputBuilder
impl UnwindSafe for CreateMultipartUploadInputBuilder
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§default unsafe fn clone_to_uninit(&self, dst: *mut T)
default unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit
)