Struct aws_sdk_s3::operation::complete_multipart_upload::builders::CompleteMultipartUploadInputBuilder
source · #[non_exhaustive]pub struct CompleteMultipartUploadInputBuilder { /* private fields */ }
Expand description
A builder for CompleteMultipartUploadInput
.
Implementations§
source§impl CompleteMultipartUploadInputBuilder
impl CompleteMultipartUploadInputBuilder
sourcepub fn bucket(self, input: impl Into<String>) -> Self
pub fn bucket(self, input: impl Into<String>) -> Self
Name of the bucket to which the multipart upload was initiated.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3
(for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn set_bucket(self, input: Option<String>) -> Self
pub fn set_bucket(self, input: Option<String>) -> Self
Name of the bucket to which the multipart upload was initiated.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3
(for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn get_bucket(&self) -> &Option<String>
pub fn get_bucket(&self) -> &Option<String>
Name of the bucket to which the multipart upload was initiated.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3
(for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn key(self, input: impl Into<String>) -> Self
pub fn key(self, input: impl Into<String>) -> Self
Object key for which the multipart upload was initiated.
This field is required.sourcepub fn set_key(self, input: Option<String>) -> Self
pub fn set_key(self, input: Option<String>) -> Self
Object key for which the multipart upload was initiated.
sourcepub fn get_key(&self) -> &Option<String>
pub fn get_key(&self) -> &Option<String>
Object key for which the multipart upload was initiated.
sourcepub fn multipart_upload(self, input: CompletedMultipartUpload) -> Self
pub fn multipart_upload(self, input: CompletedMultipartUpload) -> Self
The container for the multipart upload request information.
sourcepub fn set_multipart_upload(
self,
input: Option<CompletedMultipartUpload>,
) -> Self
pub fn set_multipart_upload( self, input: Option<CompletedMultipartUpload>, ) -> Self
The container for the multipart upload request information.
sourcepub fn get_multipart_upload(&self) -> &Option<CompletedMultipartUpload>
pub fn get_multipart_upload(&self) -> &Option<CompletedMultipartUpload>
The container for the multipart upload request information.
sourcepub fn upload_id(self, input: impl Into<String>) -> Self
pub fn upload_id(self, input: impl Into<String>) -> Self
ID for the initiated multipart upload.
This field is required.sourcepub fn set_upload_id(self, input: Option<String>) -> Self
pub fn set_upload_id(self, input: Option<String>) -> Self
ID for the initiated multipart upload.
sourcepub fn get_upload_id(&self) -> &Option<String>
pub fn get_upload_id(&self) -> &Option<String>
ID for the initiated multipart upload.
sourcepub fn checksum_crc32(self, input: impl Into<String>) -> Self
pub fn checksum_crc32(self, input: impl Into<String>) -> Self
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn set_checksum_crc32(self, input: Option<String>) -> Self
pub fn set_checksum_crc32(self, input: Option<String>) -> Self
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn get_checksum_crc32(&self) -> &Option<String>
pub fn get_checksum_crc32(&self) -> &Option<String>
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn checksum_crc32_c(self, input: impl Into<String>) -> Self
pub fn checksum_crc32_c(self, input: impl Into<String>) -> Self
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn set_checksum_crc32_c(self, input: Option<String>) -> Self
pub fn set_checksum_crc32_c(self, input: Option<String>) -> Self
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn get_checksum_crc32_c(&self) -> &Option<String>
pub fn get_checksum_crc32_c(&self) -> &Option<String>
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn checksum_sha1(self, input: impl Into<String>) -> Self
pub fn checksum_sha1(self, input: impl Into<String>) -> Self
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn set_checksum_sha1(self, input: Option<String>) -> Self
pub fn set_checksum_sha1(self, input: Option<String>) -> Self
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn get_checksum_sha1(&self) -> &Option<String>
pub fn get_checksum_sha1(&self) -> &Option<String>
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn checksum_sha256(self, input: impl Into<String>) -> Self
pub fn checksum_sha256(self, input: impl Into<String>) -> Self
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn set_checksum_sha256(self, input: Option<String>) -> Self
pub fn set_checksum_sha256(self, input: Option<String>) -> Self
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn get_checksum_sha256(&self) -> &Option<String>
pub fn get_checksum_sha256(&self) -> &Option<String>
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn request_payer(self, input: RequestPayer) -> Self
pub fn request_payer(self, input: RequestPayer) -> Self
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn set_request_payer(self, input: Option<RequestPayer>) -> Self
pub fn set_request_payer(self, input: Option<RequestPayer>) -> Self
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn get_request_payer(&self) -> &Option<RequestPayer>
pub fn get_request_payer(&self) -> &Option<RequestPayer>
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn get_expected_bucket_owner(&self) -> &Option<String>
pub fn get_expected_bucket_owner(&self) -> &Option<String>
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn sse_customer_algorithm(self, input: impl Into<String>) -> Self
pub fn sse_customer_algorithm(self, input: impl Into<String>) -> Self
The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is required only when the object was created using a checksum algorithm or if your bucket policy requires the use of SSE-C. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn set_sse_customer_algorithm(self, input: Option<String>) -> Self
pub fn set_sse_customer_algorithm(self, input: Option<String>) -> Self
The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is required only when the object was created using a checksum algorithm or if your bucket policy requires the use of SSE-C. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn get_sse_customer_algorithm(&self) -> &Option<String>
pub fn get_sse_customer_algorithm(&self) -> &Option<String>
The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is required only when the object was created using a checksum algorithm or if your bucket policy requires the use of SSE-C. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn sse_customer_key(self, input: impl Into<String>) -> Self
pub fn sse_customer_key(self, input: impl Into<String>) -> Self
The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn set_sse_customer_key(self, input: Option<String>) -> Self
pub fn set_sse_customer_key(self, input: Option<String>) -> Self
The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn get_sse_customer_key(&self) -> &Option<String>
pub fn get_sse_customer_key(&self) -> &Option<String>
The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn sse_customer_key_md5(self, input: impl Into<String>) -> Self
pub fn sse_customer_key_md5(self, input: impl Into<String>) -> Self
The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn set_sse_customer_key_md5(self, input: Option<String>) -> Self
pub fn set_sse_customer_key_md5(self, input: Option<String>) -> Self
The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn get_sse_customer_key_md5(&self) -> &Option<String>
pub fn get_sse_customer_key_md5(&self) -> &Option<String>
The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn build(self) -> Result<CompleteMultipartUploadInput, BuildError>
pub fn build(self) -> Result<CompleteMultipartUploadInput, BuildError>
Consumes the builder and constructs a CompleteMultipartUploadInput
.
source§impl CompleteMultipartUploadInputBuilder
impl CompleteMultipartUploadInputBuilder
sourcepub async fn send_with(
self,
client: &Client,
) -> Result<CompleteMultipartUploadOutput, SdkError<CompleteMultipartUploadError, HttpResponse>>
pub async fn send_with( self, client: &Client, ) -> Result<CompleteMultipartUploadOutput, SdkError<CompleteMultipartUploadError, HttpResponse>>
Sends a request with this input using the given client.
Trait Implementations§
source§impl Clone for CompleteMultipartUploadInputBuilder
impl Clone for CompleteMultipartUploadInputBuilder
source§fn clone(&self) -> CompleteMultipartUploadInputBuilder
fn clone(&self) -> CompleteMultipartUploadInputBuilder
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresource§impl Default for CompleteMultipartUploadInputBuilder
impl Default for CompleteMultipartUploadInputBuilder
source§fn default() -> CompleteMultipartUploadInputBuilder
fn default() -> CompleteMultipartUploadInputBuilder
source§impl PartialEq for CompleteMultipartUploadInputBuilder
impl PartialEq for CompleteMultipartUploadInputBuilder
source§fn eq(&self, other: &CompleteMultipartUploadInputBuilder) -> bool
fn eq(&self, other: &CompleteMultipartUploadInputBuilder) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for CompleteMultipartUploadInputBuilder
Auto Trait Implementations§
impl Freeze for CompleteMultipartUploadInputBuilder
impl RefUnwindSafe for CompleteMultipartUploadInputBuilder
impl Send for CompleteMultipartUploadInputBuilder
impl Sync for CompleteMultipartUploadInputBuilder
impl Unpin for CompleteMultipartUploadInputBuilder
impl UnwindSafe for CompleteMultipartUploadInputBuilder
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§default unsafe fn clone_to_uninit(&self, dst: *mut T)
default unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit
)