Struct aws_sdk_s3::operation::complete_multipart_upload::builders::CompleteMultipartUploadOutputBuilder
source · #[non_exhaustive]pub struct CompleteMultipartUploadOutputBuilder { /* private fields */ }
Expand description
A builder for CompleteMultipartUploadOutput
.
Implementations§
source§impl CompleteMultipartUploadOutputBuilder
impl CompleteMultipartUploadOutputBuilder
sourcepub fn location(self, input: impl Into<String>) -> Self
pub fn location(self, input: impl Into<String>) -> Self
The URI that identifies the newly created object.
sourcepub fn set_location(self, input: Option<String>) -> Self
pub fn set_location(self, input: Option<String>) -> Self
The URI that identifies the newly created object.
sourcepub fn get_location(&self) -> &Option<String>
pub fn get_location(&self) -> &Option<String>
The URI that identifies the newly created object.
sourcepub fn bucket(self, input: impl Into<String>) -> Self
pub fn bucket(self, input: impl Into<String>) -> Self
The name of the bucket that contains the newly created object. Does not return the access point ARN or access point alias if used.
Access points are not supported by directory buckets.
sourcepub fn set_bucket(self, input: Option<String>) -> Self
pub fn set_bucket(self, input: Option<String>) -> Self
The name of the bucket that contains the newly created object. Does not return the access point ARN or access point alias if used.
Access points are not supported by directory buckets.
sourcepub fn get_bucket(&self) -> &Option<String>
pub fn get_bucket(&self) -> &Option<String>
The name of the bucket that contains the newly created object. Does not return the access point ARN or access point alias if used.
Access points are not supported by directory buckets.
sourcepub fn set_key(self, input: Option<String>) -> Self
pub fn set_key(self, input: Option<String>) -> Self
The object key of the newly created object.
sourcepub fn expiration(self, input: impl Into<String>) -> Self
pub fn expiration(self, input: impl Into<String>) -> Self
If the object expiration is configured, this will contain the expiration date (expiry-date
) and rule ID (rule-id
). The value of rule-id
is URL-encoded.
This functionality is not supported for directory buckets.
sourcepub fn set_expiration(self, input: Option<String>) -> Self
pub fn set_expiration(self, input: Option<String>) -> Self
If the object expiration is configured, this will contain the expiration date (expiry-date
) and rule ID (rule-id
). The value of rule-id
is URL-encoded.
This functionality is not supported for directory buckets.
sourcepub fn get_expiration(&self) -> &Option<String>
pub fn get_expiration(&self) -> &Option<String>
If the object expiration is configured, this will contain the expiration date (expiry-date
) and rule ID (rule-id
). The value of rule-id
is URL-encoded.
This functionality is not supported for directory buckets.
sourcepub fn e_tag(self, input: impl Into<String>) -> Self
pub fn e_tag(self, input: impl Into<String>) -> Self
Entity tag that identifies the newly created object's data. Objects with different object data will have different entity tags. The entity tag is an opaque string. The entity tag may or may not be an MD5 digest of the object data. If the entity tag is not an MD5 digest of the object data, it will contain one or more nonhexadecimal characters and/or will consist of less than 32 or more than 32 hexadecimal digits. For more information about how the entity tag is calculated, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn set_e_tag(self, input: Option<String>) -> Self
pub fn set_e_tag(self, input: Option<String>) -> Self
Entity tag that identifies the newly created object's data. Objects with different object data will have different entity tags. The entity tag is an opaque string. The entity tag may or may not be an MD5 digest of the object data. If the entity tag is not an MD5 digest of the object data, it will contain one or more nonhexadecimal characters and/or will consist of less than 32 or more than 32 hexadecimal digits. For more information about how the entity tag is calculated, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn get_e_tag(&self) -> &Option<String>
pub fn get_e_tag(&self) -> &Option<String>
Entity tag that identifies the newly created object's data. Objects with different object data will have different entity tags. The entity tag is an opaque string. The entity tag may or may not be an MD5 digest of the object data. If the entity tag is not an MD5 digest of the object data, it will contain one or more nonhexadecimal characters and/or will consist of less than 32 or more than 32 hexadecimal digits. For more information about how the entity tag is calculated, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn checksum_crc32(self, input: impl Into<String>) -> Self
pub fn checksum_crc32(self, input: impl Into<String>) -> Self
The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn set_checksum_crc32(self, input: Option<String>) -> Self
pub fn set_checksum_crc32(self, input: Option<String>) -> Self
The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn get_checksum_crc32(&self) -> &Option<String>
pub fn get_checksum_crc32(&self) -> &Option<String>
The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn checksum_crc32_c(self, input: impl Into<String>) -> Self
pub fn checksum_crc32_c(self, input: impl Into<String>) -> Self
The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn set_checksum_crc32_c(self, input: Option<String>) -> Self
pub fn set_checksum_crc32_c(self, input: Option<String>) -> Self
The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn get_checksum_crc32_c(&self) -> &Option<String>
pub fn get_checksum_crc32_c(&self) -> &Option<String>
The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn checksum_sha1(self, input: impl Into<String>) -> Self
pub fn checksum_sha1(self, input: impl Into<String>) -> Self
The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn set_checksum_sha1(self, input: Option<String>) -> Self
pub fn set_checksum_sha1(self, input: Option<String>) -> Self
The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn get_checksum_sha1(&self) -> &Option<String>
pub fn get_checksum_sha1(&self) -> &Option<String>
The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn checksum_sha256(self, input: impl Into<String>) -> Self
pub fn checksum_sha256(self, input: impl Into<String>) -> Self
The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn set_checksum_sha256(self, input: Option<String>) -> Self
pub fn set_checksum_sha256(self, input: Option<String>) -> Self
The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn get_checksum_sha256(&self) -> &Option<String>
pub fn get_checksum_sha256(&self) -> &Option<String>
The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
sourcepub fn server_side_encryption(self, input: ServerSideEncryption) -> Self
pub fn server_side_encryption(self, input: ServerSideEncryption) -> Self
The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256
, aws:kms
).
For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256
) is supported.
sourcepub fn set_server_side_encryption(
self,
input: Option<ServerSideEncryption>,
) -> Self
pub fn set_server_side_encryption( self, input: Option<ServerSideEncryption>, ) -> Self
The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256
, aws:kms
).
For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256
) is supported.
sourcepub fn get_server_side_encryption(&self) -> &Option<ServerSideEncryption>
pub fn get_server_side_encryption(&self) -> &Option<ServerSideEncryption>
The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256
, aws:kms
).
For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256
) is supported.
sourcepub fn version_id(self, input: impl Into<String>) -> Self
pub fn version_id(self, input: impl Into<String>) -> Self
Version ID of the newly created object, in case the bucket has versioning turned on.
This functionality is not supported for directory buckets.
sourcepub fn set_version_id(self, input: Option<String>) -> Self
pub fn set_version_id(self, input: Option<String>) -> Self
Version ID of the newly created object, in case the bucket has versioning turned on.
This functionality is not supported for directory buckets.
sourcepub fn get_version_id(&self) -> &Option<String>
pub fn get_version_id(&self) -> &Option<String>
Version ID of the newly created object, in case the bucket has versioning turned on.
This functionality is not supported for directory buckets.
sourcepub fn ssekms_key_id(self, input: impl Into<String>) -> Self
pub fn ssekms_key_id(self, input: impl Into<String>) -> Self
If present, indicates the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.
This functionality is not supported for directory buckets.
sourcepub fn set_ssekms_key_id(self, input: Option<String>) -> Self
pub fn set_ssekms_key_id(self, input: Option<String>) -> Self
If present, indicates the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.
This functionality is not supported for directory buckets.
sourcepub fn get_ssekms_key_id(&self) -> &Option<String>
pub fn get_ssekms_key_id(&self) -> &Option<String>
If present, indicates the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.
This functionality is not supported for directory buckets.
sourcepub fn bucket_key_enabled(self, input: bool) -> Self
pub fn bucket_key_enabled(self, input: bool) -> Self
Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
This functionality is not supported for directory buckets.
sourcepub fn set_bucket_key_enabled(self, input: Option<bool>) -> Self
pub fn set_bucket_key_enabled(self, input: Option<bool>) -> Self
Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
This functionality is not supported for directory buckets.
sourcepub fn get_bucket_key_enabled(&self) -> &Option<bool>
pub fn get_bucket_key_enabled(&self) -> &Option<bool>
Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
This functionality is not supported for directory buckets.
sourcepub fn request_charged(self, input: RequestCharged) -> Self
pub fn request_charged(self, input: RequestCharged) -> Self
If present, indicates that the requester was successfully charged for the request.
This functionality is not supported for directory buckets.
sourcepub fn set_request_charged(self, input: Option<RequestCharged>) -> Self
pub fn set_request_charged(self, input: Option<RequestCharged>) -> Self
If present, indicates that the requester was successfully charged for the request.
This functionality is not supported for directory buckets.
sourcepub fn get_request_charged(&self) -> &Option<RequestCharged>
pub fn get_request_charged(&self) -> &Option<RequestCharged>
If present, indicates that the requester was successfully charged for the request.
This functionality is not supported for directory buckets.
sourcepub fn build(self) -> CompleteMultipartUploadOutput
pub fn build(self) -> CompleteMultipartUploadOutput
Consumes the builder and constructs a CompleteMultipartUploadOutput
.
Trait Implementations§
source§impl Clone for CompleteMultipartUploadOutputBuilder
impl Clone for CompleteMultipartUploadOutputBuilder
source§fn clone(&self) -> CompleteMultipartUploadOutputBuilder
fn clone(&self) -> CompleteMultipartUploadOutputBuilder
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresource§impl Default for CompleteMultipartUploadOutputBuilder
impl Default for CompleteMultipartUploadOutputBuilder
source§fn default() -> CompleteMultipartUploadOutputBuilder
fn default() -> CompleteMultipartUploadOutputBuilder
source§impl PartialEq for CompleteMultipartUploadOutputBuilder
impl PartialEq for CompleteMultipartUploadOutputBuilder
source§fn eq(&self, other: &CompleteMultipartUploadOutputBuilder) -> bool
fn eq(&self, other: &CompleteMultipartUploadOutputBuilder) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for CompleteMultipartUploadOutputBuilder
Auto Trait Implementations§
impl Freeze for CompleteMultipartUploadOutputBuilder
impl RefUnwindSafe for CompleteMultipartUploadOutputBuilder
impl Send for CompleteMultipartUploadOutputBuilder
impl Sync for CompleteMultipartUploadOutputBuilder
impl Unpin for CompleteMultipartUploadOutputBuilder
impl UnwindSafe for CompleteMultipartUploadOutputBuilder
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§default unsafe fn clone_to_uninit(&self, dst: *mut T)
default unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit
)