Struct tracing_subscriber::registry::Registry

source ·
pub struct Registry { /* private fields */ }
Expand description

A shared, reusable store for spans.

A Registry is a Subscriber around which multiple Layers implementing various behaviors may be added. Unlike other types implementing Subscriber, Registry does not actually record traces itself: instead, it collects and stores span data that is exposed to any Layers wrapping it through implementations of the LookupSpan trait. The Registry is responsible for storing span metadata, recording relationships between spans, and tracking which spans are active and which are closed. In addition, it provides a mechanism for Layers to store user-defined per-span data, called extensions, in the registry. This allows Layer-specific data to benefit from the Registry’s high-performance concurrent storage.

This registry is implemented using a lock-free sharded slab, and is highly optimized for concurrent access.

§Span ID Generation

Span IDs are not globally unique, but the registry ensures that no two currently active spans have the same ID within a process.

One of the primary responsibilities of the registry is to generate span IDs. Therefore, it’s important for other code that interacts with the registry, such as Layers, to understand the guarantees of the span IDs that are generated.

The registry’s span IDs are guaranteed to be unique at a given point in time. This means that an active span will never be assigned the same ID as another currently active span. However, the registry will eventually reuse the IDs of closed spans, although an ID will never be reassigned immediately after a span has closed.

Spans are not considered closed by the Registry until every Span reference with that ID has been dropped.

Thus: span IDs generated by the registry should be considered unique only at a given point in time, and only relative to other spans generated by the same process. Two spans with the same ID will not exist in the same process concurrently. However, if historical span data is being stored, the same ID may occur for multiple spans times in that data. If spans must be uniquely identified in historical data, the user code storing this data must assign its own unique identifiers to those spans. A counter is generally sufficient for this.

Similarly, span IDs generated by the registry are not unique outside of a given process. Distributed tracing systems may require identifiers that are unique across multiple processes on multiple machines (for example, OpenTelemetry’s SpanIds and TraceIds). tracing span IDs generated by the registry should not be used for this purpose. Instead, code which integrates with a distributed tracing system should generate and propagate its own IDs according to the rules specified by the distributed tracing system. These IDs can be associated with tracing spans using fields and/or stored span data.

Trait Implementations§

source§

impl Debug for Registry

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for Registry

source§

fn default() -> Self

Returns the “default value” for a type. Read more
source§

impl<'a> LookupSpan<'a> for Registry

§

type Data = Data<'a>

The type of span data stored in this registry.
source§

fn span_data(&'a self, id: &Id) -> Option<Self::Data>

Returns the SpanData for a given Id, if it exists.
source§

fn register_filter(&mut self) -> FilterId

Registers a Filter for per-layer filtering with this Subscriber. Read more
source§

fn span(&'a self, id: &Id) -> Option<SpanRef<'_, Self>>
where Self: Sized,

Returns a SpanRef for the span with the given Id, if it exists. Read more
source§

impl Subscriber for Registry

source§

fn record(&self, _: &Id, _: &Record<'_>)

This is intentionally not implemented, as recording fields on a span is the responsibility of layers atop of this registry.

source§

fn event(&self, _: &Event<'_>)

This is intentionally not implemented, as recording events is the responsibility of layers atop of this registry.

source§

fn try_close(&self, id: Id) -> bool

Decrements the reference count of the span with the given id, and removes the span if it is zero.

The allocated span slot will be reused when a new span is created.

source§

fn register_callsite(&self, _: &'static Metadata<'static>) -> Interest

Registers a new callsite with this subscriber, returning whether or not the subscriber is interested in being notified about the callsite. Read more
source§

fn enabled(&self, _: &Metadata<'_>) -> bool

Returns true if a span or event with the specified metadata would be recorded. Read more
source§

fn new_span(&self, attrs: &Attributes<'_>) -> Id

Visit the construction of a new span, returning a new span ID for the span being constructed. Read more
source§

fn record_follows_from(&self, _span: &Id, _follows: &Id)

Adds an indication that span follows from the span with the id follows. Read more
source§

fn event_enabled(&self, _event: &Event<'_>) -> bool

Determine if an Event should be recorded. Read more
source§

fn enter(&self, id: &Id)

Records that a span has been entered. Read more
source§

fn exit(&self, id: &Id)

Records that a span has been exited. Read more
source§

fn clone_span(&self, id: &Id) -> Id

Notifies the subscriber that a span ID has been cloned. Read more
source§

fn current_span(&self) -> Current

Returns a type representing this subscriber’s view of the current span. Read more
source§

fn on_register_dispatch(&self, subscriber: &Dispatch)

Invoked when this subscriber becomes a Dispatch. Read more
source§

fn max_level_hint(&self) -> Option<LevelFilter>

Returns the highest verbosity level that this Subscriber will enable, or None, if the subscriber does not implement level-based filtering or chooses not to implement this method. Read more
source§

fn drop_span(&self, _id: Id)

👎Deprecated since 0.1.2: use Subscriber::try_close instead
This method is deprecated. Read more
source§

unsafe fn downcast_raw(&self, id: TypeId) -> Option<*const ()>

If self is the same type as the provided TypeId, returns an untyped *const pointer to that type. Otherwise, returns None. Read more

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<S> SubscriberExt for S
where S: Subscriber,

source§

fn with<L>(self, layer: L) -> Layered<L, Self>
where L: Layer<Self>, Self: Sized,

Wraps self with the provided layer.
source§

impl<T> SubscriberInitExt for T
where T: Into<Dispatch>,

source§

fn set_default(self) -> DefaultGuard

Sets self as the default subscriber in the current scope, returning a guard that will unset it when dropped. Read more
source§

fn try_init(self) -> Result<(), TryInitError>

Attempts to set self as the global default subscriber in the current scope, returning an error if one is already set. Read more
source§

fn init(self)

Attempts to set self as the global default subscriber in the current scope, panicking if this fails. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more