Struct Options

pub struct Options { /* private fields */ }

Ptrace options used in conjunction with the PTRACE_SETOPTIONS request. See man ptrace for more details.

Implementations

impl Options

pub const PTRACE_O_TRACESYSGOOD: Self = _

When delivering system call traps set a bit to allow tracer to distinguish between normal stops or syscall stops. May not work on all systems.

pub const PTRACE_O_TRACEFORK: Self = _

Stop tracee at next fork and start tracing the forked process.

pub const PTRACE_O_TRACEVFORK: Self = _

Stop tracee at next vfork call and trace the vforked process.

pub const PTRACE_O_TRACECLONE: Self = _

Stop tracee at next clone call and trace the cloned process.

pub const PTRACE_O_TRACEEXEC: Self = _

Stop tracee at next execve call.

pub const PTRACE_O_TRACEVFORKDONE: Self = _

Stop tracee at vfork completion.

pub const PTRACE_O_TRACEEXIT: Self = _

Stop tracee at next exit call. Stops before exit commences allowing tracer to see location of exit and register states.

pub const PTRACE_O_TRACESECCOMP: Self = _

Stop tracee when a SECCOMP_RET_TRACE rule is triggered. See man seccomp for more details.

pub const PTRACE_O_EXITKILL: Self = _

Send a SIGKILL to the tracee if the tracer exits. This is useful for ptrace jailers to prevent tracees from escaping their control.

pub const fn empty() -> Self

Returns an empty set of flags.

pub const fn all() -> Self

Returns the set containing all flags.

pub const fn bits(&self) -> c_int

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: c_int) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: c_int) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: c_int) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: Self) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut self, other: Self)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: Self)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: Self)

Toggles the specified flags in-place.

pub fn set(&mut self, other: Self, value: bool)

Inserts or removes the specified flags depending on the passed value.

pub const fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

pub const fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

pub const fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

pub const fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

pub const fn complement(self) -> Self

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

Trait Implementations

impl Binary for Options

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for Options

fn bitand(self, other: Self) -> Self

Returns the intersection between the two sets of flags.

type Output = Options

The resulting type after applying the & operator.

impl BitAndAssign for Options

fn bitand_assign(&mut self, other: Self)

Disables all flags disabled in the set.

impl BitOr for Options

fn bitor(self, other: Options) -> Self

Returns the union of the two sets of flags.

type Output = Options

The resulting type after applying the | operator.

impl BitOrAssign for Options

fn bitor_assign(&mut self, other: Self)

Adds the set of flags.

impl BitXor for Options

fn bitxor(self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

type Output = Options

The resulting type after applying the ^ operator.

impl BitXorAssign for Options

fn bitxor_assign(&mut self, other: Self)

Toggles the set of flags.

impl Clone for Options

fn clone(&self) -> Options

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Options

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<Options> for Options

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<Options> for Options

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

Creates a value from an iterator.

impl Hash for Options

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl LowerHex for Options

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for Options

fn not(self) -> Self

Returns the complement of this set of flags.

type Output = Options

The resulting type after applying the ! operator.

impl Octal for Options

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for Options

fn cmp(&self, other: &Options) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for Options

fn eq(&self, other: &Options) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Options

fn partial_cmp(&self, other: &Options) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Sub for Options

fn sub(self, other: Self) -> Self

Returns the set difference of the two sets of flags.

type Output = Options

The resulting type after applying the - operator.

impl SubAssign for Options

fn sub_assign(&mut self, other: Self)

Disables all flags enabled in the set.

impl UpperHex for Options

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for Options

impl Eq for Options

impl StructuralPartialEq for Options