Struct UpdateObjectEncryptionInputBuilder 

#[non_exhaustive]
pub struct UpdateObjectEncryptionInputBuilder { /* private fields */ }

A builder for UpdateObjectEncryptionInput.

Implementations

impl UpdateObjectEncryptionInputBuilder

pub fn bucket(self, input: impl Into<String>) -> Self

The name of the general purpose bucket that contains the specified object key name.

When you use this operation with an access point attached to a general purpose bucket, you must either provide the alias of the access point in place of the bucket name or you must specify the access point Amazon Resource Name (ARN). When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Referencing access points in the Amazon S3 User Guide.

This field is required.

pub fn set_bucket(self, input: Option<String>) -> Self

The name of the general purpose bucket that contains the specified object key name.

When you use this operation with an access point attached to a general purpose bucket, you must either provide the alias of the access point in place of the bucket name or you must specify the access point Amazon Resource Name (ARN). When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Referencing access points in the Amazon S3 User Guide.

pub fn get_bucket(&self) -> &Option<String>

The name of the general purpose bucket that contains the specified object key name.

When you use this operation with an access point attached to a general purpose bucket, you must either provide the alias of the access point in place of the bucket name or you must specify the access point Amazon Resource Name (ARN). When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Referencing access points in the Amazon S3 User Guide.

pub fn key(self, input: impl Into<String>) -> Self

The key name of the object that you want to update the server-side encryption type for.

This field is required.

pub fn set_key(self, input: Option<String>) -> Self

The key name of the object that you want to update the server-side encryption type for.

pub fn get_key(&self) -> &Option<String>

The key name of the object that you want to update the server-side encryption type for.

pub fn version_id(self, input: impl Into<String>) -> Self

The version ID of the object that you want to update the server-side encryption type for.

pub fn set_version_id(self, input: Option<String>) -> Self

The version ID of the object that you want to update the server-side encryption type for.

pub fn get_version_id(&self) -> &Option<String>

The version ID of the object that you want to update the server-side encryption type for.

pub fn object_encryption(self, input: ObjectEncryption) -> Self

The updated server-side encryption type for this object. The UpdateObjectEncryption operation supports the SSE-S3 and SSE-KMS encryption types.

Valid Values: SSES3 | SSEKMS

This field is required.

pub fn set_object_encryption(self, input: Option<ObjectEncryption>) -> Self

The updated server-side encryption type for this object. The UpdateObjectEncryption operation supports the SSE-S3 and SSE-KMS encryption types.

Valid Values: SSES3 | SSEKMS

pub fn get_object_encryption(&self) -> &Option<ObjectEncryption>

The updated server-side encryption type for this object. The UpdateObjectEncryption operation supports the SSE-S3 and SSE-KMS encryption types.

Valid Values: SSES3 | SSEKMS

pub fn request_payer(self, input: RequestPayer) -> Self

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for the corresponding charges. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn set_request_payer(self, input: Option<RequestPayer>) -> Self

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for the corresponding charges. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn get_request_payer(&self) -> &Option<RequestPayer>

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for the corresponding charges. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self

The account ID of the expected bucket owner. If the account ID that you provide doesn't match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self

The account ID of the expected bucket owner. If the account ID that you provide doesn't match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn get_expected_bucket_owner(&self) -> &Option<String>

The account ID of the expected bucket owner. If the account ID that you provide doesn't match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn content_md5(self, input: impl Into<String>) -> Self

The MD5 hash for the request body. For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.

pub fn set_content_md5(self, input: Option<String>) -> Self

The MD5 hash for the request body. For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.

pub fn get_content_md5(&self) -> &Option<String>

The MD5 hash for the request body. For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.

pub fn checksum_algorithm(self, input: ChecksumAlgorithm) -> Self

Indicates the algorithm used to create the checksum for the object when you use an Amazon Web Services SDK. This header doesn't provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

pub fn set_checksum_algorithm(self, input: Option<ChecksumAlgorithm>) -> Self

Indicates the algorithm used to create the checksum for the object when you use an Amazon Web Services SDK. This header doesn't provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

pub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>

Indicates the algorithm used to create the checksum for the object when you use an Amazon Web Services SDK. This header doesn't provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

pub fn build(self) -> Result<UpdateObjectEncryptionInput, BuildError>

Consumes the builder and constructs a UpdateObjectEncryptionInput.

impl UpdateObjectEncryptionInputBuilder

pub async fn send_with( self, client: &Client, ) -> Result<UpdateObjectEncryptionOutput, SdkError<UpdateObjectEncryptionError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for UpdateObjectEncryptionInputBuilder

fn clone(&self) -> UpdateObjectEncryptionInputBuilder

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for UpdateObjectEncryptionInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for UpdateObjectEncryptionInputBuilder

fn default() -> UpdateObjectEncryptionInputBuilder

Returns the “default value” for a type.

impl PartialEq for UpdateObjectEncryptionInputBuilder

fn eq(&self, other: &UpdateObjectEncryptionInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for UpdateObjectEncryptionInputBuilder