Struct parquet::format::Encoding

source ·
pub struct Encoding(pub i32);
Expand description

Encodings supported by Parquet. Not all encodings are valid for all types. These enums are also used to specify the encoding of definition and repetition levels. See the accompanying doc for the details of the more complicated encodings.

Tuple Fields§

§0: i32

Implementations§

source§

impl Encoding

source

pub const PLAIN: Encoding = _

Default encoding. BOOLEAN - 1 bit per value. 0 is false; 1 is true. INT32 - 4 bytes per value. Stored as little-endian. INT64 - 8 bytes per value. Stored as little-endian. FLOAT - 4 bytes per value. IEEE. Stored as little-endian. DOUBLE - 8 bytes per value. IEEE. Stored as little-endian. BYTE_ARRAY - 4 byte length stored as little endian, followed by bytes. FIXED_LEN_BYTE_ARRAY - Just the bytes.

source

pub const PLAIN_DICTIONARY: Encoding = _

Deprecated: Dictionary encoding. The values in the dictionary are encoded in the plain type. in a data page use RLE_DICTIONARY instead. in a Dictionary page use PLAIN instead

source

pub const RLE: Encoding = _

Group packed run length encoding. Usable for definition/repetition levels encoding and Booleans (on one bit: 0 is false; 1 is true.)

source

pub const BIT_PACKED: Encoding = _

Bit packed encoding. This can only be used if the data has a known max width. Usable for definition/repetition levels encoding.

source

pub const DELTA_BINARY_PACKED: Encoding = _

Delta encoding for integers. This can be used for int columns and works best on sorted data

source

pub const DELTA_LENGTH_BYTE_ARRAY: Encoding = _

Encoding for byte arrays to separate the length values and the data. The lengths are encoded using DELTA_BINARY_PACKED

source

pub const DELTA_BYTE_ARRAY: Encoding = _

Incremental-encoded byte array. Prefix lengths are encoded using DELTA_BINARY_PACKED. Suffixes are stored as delta length byte arrays.

source

pub const RLE_DICTIONARY: Encoding = _

Dictionary encoding: the ids are encoded using the RLE encoding

source

pub const BYTE_STREAM_SPLIT: Encoding = _

Encoding for floating-point data. K byte-streams are created where K is the size in bytes of the data type. The individual bytes of an FP value are scattered to the corresponding stream and the streams are concatenated. This itself does not reduce the size of the data but can lead to better compression afterwards.

source

pub const ENUM_VALUES: &'static [Self] = _

Trait Implementations§

source§

impl Clone for Encoding

source§

fn clone(&self) -> Encoding

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for Encoding

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl From<&Encoding> for i32

source§

fn from(e: &Encoding) -> i32

Converts to this type from the input type.
source§

impl From<&i32> for Encoding

source§

fn from(i: &i32) -> Self

Converts to this type from the input type.
source§

impl From<Encoding> for Encoding

source§

fn from(value: Encoding) -> Self

Converts to this type from the input type.
source§

impl From<Encoding> for i32

source§

fn from(e: Encoding) -> i32

Converts to this type from the input type.
source§

impl From<i32> for Encoding

source§

fn from(i: i32) -> Self

Converts to this type from the input type.
source§

impl Hash for Encoding

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for Encoding

source§

fn cmp(&self, other: &Encoding) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for Encoding

source§

fn eq(&self, other: &Encoding) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for Encoding

source§

fn partial_cmp(&self, other: &Encoding) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl TSerializable for Encoding

source§

impl TryFrom<Encoding> for Encoding

§

type Error = ParquetError

The type returned in the event of a conversion error.
source§

fn try_from(value: Encoding) -> Result<Self>

Performs the conversion.
source§

impl Copy for Encoding

source§

impl Eq for Encoding

source§

impl StructuralPartialEq for Encoding

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> CloneToUninit for T
where T: Copy,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

source§

fn vzip(self) -> V

source§

impl<T> Allocation for T
where T: RefUnwindSafe + Send + Sync,