Struct aws_sdk_sts::operation::assume_role_with_saml::builders::AssumeRoleWithSAMLFluentBuilder

pub struct AssumeRoleWithSAMLFluentBuilder { /* private fields */ }

Fluent builder constructing a request to AssumeRoleWithSAML.

Returns a set of temporary security credentials for users who have been authenticated via a SAML authentication response. This operation provides a mechanism for tying an enterprise identity store or directory to role-based Amazon Web Services access without user-specific credentials or configuration. For a comparison of AssumeRoleWithSAML with the other API operations that produce temporary credentials, see Requesting Temporary Security Credentials and Comparing the Amazon Web Services STS API operations in the IAM User Guide.

The temporary security credentials returned by this operation consist of an access key ID, a secret access key, and a security token. Applications can use these temporary security credentials to sign calls to Amazon Web Services services.

Session Duration

By default, the temporary security credentials created by AssumeRoleWithSAML last for one hour. However, you can use the optional DurationSeconds parameter to specify the duration of your session. Your role session lasts for the duration that you specify, or until the time specified in the SAML authentication response's SessionNotOnOrAfter value, whichever is shorter. You can provide a DurationSeconds value from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. To learn how to view the maximum value for your role, see View the Maximum Session Duration Setting for a Role in the IAM User Guide. The maximum session duration limit applies when you use the AssumeRole* API operations or the assume-role* CLI commands. However the limit does not apply when you use those operations to create a console URL. For more information, see Using IAM Roles in the IAM User Guide.

Role chaining limits your CLI or Amazon Web Services API role session to a maximum of one hour. When you use the AssumeRole API operation to assume a role, you can specify the duration of your role session with the DurationSeconds parameter. You can specify a parameter value of up to 43200 seconds (12 hours), depending on the maximum session duration setting for your role. However, if you assume a role using role chaining and provide a DurationSeconds parameter value greater than one hour, the operation fails.

Permissions

The temporary security credentials created by AssumeRoleWithSAML can be used to make API calls to any Amazon Web Services service with the following exception: you cannot call the STS GetFederationToken or GetSessionToken API operations.

(Optional) You can pass inline or managed session policies to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policy Amazon Resource Names (ARNs) to use as managed session policies. The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide.

Calling AssumeRoleWithSAML does not require the use of Amazon Web Services security credentials. The identity of the caller is validated by using keys in the metadata document that is uploaded for the SAML provider entity for your identity provider.

Calling AssumeRoleWithSAML can result in an entry in your CloudTrail logs. The entry includes the value in the NameID element of the SAML assertion. We recommend that you use a NameIDType that is not associated with any personally identifiable information (PII). For example, you could instead use the persistent identifier (urn:oasis:names:tc:SAML:2.0:nameid-format:persistent).

Tags

(Optional) You can configure your IdP to pass attributes into your SAML assertion as session tags. Each session tag consists of a key name and an associated value. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide.

You can pass up to 50 session tags. The plaintext session tag keys can’t exceed 128 characters and the values can’t exceed 256 characters. For these and additional limits, see IAM and STS Character Limits in the IAM User Guide.

An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

You can pass a session tag with the same key as a tag that is attached to the role. When you do, session tags override the role's tags with the same key.

An administrator must grant you the permissions necessary to pass session tags. The administrator can also create granular permissions to allow you to pass only specific session tags. For more information, see Tutorial: Using Tags for Attribute-Based Access Control in the IAM User Guide.

You can set the session tags as transitive. Transitive tags persist during role chaining. For more information, see Chaining Roles with Session Tags in the IAM User Guide.

SAML Configuration

Before your application can call AssumeRoleWithSAML, you must configure your SAML identity provider (IdP) to issue the claims required by Amazon Web Services. Additionally, you must use Identity and Access Management (IAM) to create a SAML provider entity in your Amazon Web Services account that represents your identity provider. You must also create an IAM role that specifies this SAML provider in its trust policy.

For more information, see the following resources:

• About SAML 2.0-based Federation in the IAM User Guide.

• Creating SAML Identity Providers in the IAM User Guide.

• Configuring a Relying Party and Claims in the IAM User Guide.

• Creating a Role for SAML 2.0 Federation in the IAM User Guide.

Implementations

impl AssumeRoleWithSAMLFluentBuilder

pub fn as_input(&self) -> &AssumeRoleWithSamlInputBuilder

Access the AssumeRoleWithSAML as a reference.

pub async fn send( self, ) -> Result<AssumeRoleWithSamlOutput, SdkError<AssumeRoleWithSAMLError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn customize( self, ) -> CustomizableOperation<AssumeRoleWithSamlOutput, AssumeRoleWithSAMLError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn role_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the role that the caller is assuming.

pub fn set_role_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the role that the caller is assuming.

pub fn get_role_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the role that the caller is assuming.

pub fn principal_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the SAML provider in IAM that describes the IdP.

pub fn set_principal_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the SAML provider in IAM that describes the IdP.

pub fn get_principal_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the SAML provider in IAM that describes the IdP.

pub fn saml_assertion(self, input: impl Into<String>) -> Self

The base64 encoded SAML authentication response provided by the IdP.

For more information, see Configuring a Relying Party and Adding Claims in the IAM User Guide.

pub fn set_saml_assertion(self, input: Option<String>) -> Self

The base64 encoded SAML authentication response provided by the IdP.

For more information, see Configuring a Relying Party and Adding Claims in the IAM User Guide.

pub fn get_saml_assertion(&self) -> &Option<String>

The base64 encoded SAML authentication response provided by the IdP.

For more information, see Configuring a Relying Party and Adding Claims in the IAM User Guide.

pub fn policy_arns(self, input: PolicyDescriptorType) -> Self

Appends an item to PolicyArns.

To override the contents of this collection use set_policy_arns.

The Amazon Resource Names (ARNs) of the IAM managed policies that you want to use as managed session policies. The policies must exist in the same account as the role.

This parameter is optional. You can provide up to 10 managed policy ARNs. However, the plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. For more information about ARNs, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces in the Amazon Web Services General Reference.

An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide.

pub fn set_policy_arns(self, input: Option<Vec<PolicyDescriptorType>>) -> Self

The Amazon Resource Names (ARNs) of the IAM managed policies that you want to use as managed session policies. The policies must exist in the same account as the role.

This parameter is optional. You can provide up to 10 managed policy ARNs. However, the plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. For more information about ARNs, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces in the Amazon Web Services General Reference.

An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide.

pub fn get_policy_arns(&self) -> &Option<Vec<PolicyDescriptorType>>

The Amazon Resource Names (ARNs) of the IAM managed policies that you want to use as managed session policies. The policies must exist in the same account as the role.

This parameter is optional. You can provide up to 10 managed policy ARNs. However, the plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. For more information about ARNs, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces in the Amazon Web Services General Reference.

An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide.

pub fn policy(self, input: impl Into<String>) -> Self

An IAM policy in JSON format that you want to use as an inline session policy.

This parameter is optional. Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide.

The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. The JSON policy characters can be any ASCII character from the space character to the end of the valid character list (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), and carriage return (\u000D) characters.

An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

pub fn set_policy(self, input: Option<String>) -> Self

An IAM policy in JSON format that you want to use as an inline session policy.

This parameter is optional. Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide.

The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. The JSON policy characters can be any ASCII character from the space character to the end of the valid character list (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), and carriage return (\u000D) characters.

An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

pub fn get_policy(&self) -> &Option<String>

An IAM policy in JSON format that you want to use as an inline session policy.

This parameter is optional. Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide.

The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. The JSON policy characters can be any ASCII character from the space character to the end of the valid character list (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), and carriage return (\u000D) characters.

An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

pub fn duration_seconds(self, input: i32) -> Self

The duration, in seconds, of the role session. Your role session lasts for the duration that you specify for the DurationSeconds parameter, or until the time specified in the SAML authentication response's SessionNotOnOrAfter value, whichever is shorter. You can provide a DurationSeconds value from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. If you specify a value higher than this setting, the operation fails. For example, if you specify a session duration of 12 hours, but your administrator set the maximum session duration to 6 hours, your operation fails. To learn how to view the maximum value for your role, see View the Maximum Session Duration Setting for a Role in the IAM User Guide.

By default, the value is set to 3600 seconds.

The DurationSeconds parameter is separate from the duration of a console session that you might request using the returned credentials. The request to the federation endpoint for a console sign-in token takes a SessionDuration parameter that specifies the maximum length of the console session. For more information, see Creating a URL that Enables Federated Users to Access the Amazon Web Services Management Console in the IAM User Guide.

pub fn set_duration_seconds(self, input: Option<i32>) -> Self

The duration, in seconds, of the role session. Your role session lasts for the duration that you specify for the DurationSeconds parameter, or until the time specified in the SAML authentication response's SessionNotOnOrAfter value, whichever is shorter. You can provide a DurationSeconds value from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. If you specify a value higher than this setting, the operation fails. For example, if you specify a session duration of 12 hours, but your administrator set the maximum session duration to 6 hours, your operation fails. To learn how to view the maximum value for your role, see View the Maximum Session Duration Setting for a Role in the IAM User Guide.

By default, the value is set to 3600 seconds.

The DurationSeconds parameter is separate from the duration of a console session that you might request using the returned credentials. The request to the federation endpoint for a console sign-in token takes a SessionDuration parameter that specifies the maximum length of the console session. For more information, see Creating a URL that Enables Federated Users to Access the Amazon Web Services Management Console in the IAM User Guide.

pub fn get_duration_seconds(&self) -> &Option<i32>

The duration, in seconds, of the role session. Your role session lasts for the duration that you specify for the DurationSeconds parameter, or until the time specified in the SAML authentication response's SessionNotOnOrAfter value, whichever is shorter. You can provide a DurationSeconds value from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. If you specify a value higher than this setting, the operation fails. For example, if you specify a session duration of 12 hours, but your administrator set the maximum session duration to 6 hours, your operation fails. To learn how to view the maximum value for your role, see View the Maximum Session Duration Setting for a Role in the IAM User Guide.

By default, the value is set to 3600 seconds.

The DurationSeconds parameter is separate from the duration of a console session that you might request using the returned credentials. The request to the federation endpoint for a console sign-in token takes a SessionDuration parameter that specifies the maximum length of the console session. For more information, see Creating a URL that Enables Federated Users to Access the Amazon Web Services Management Console in the IAM User Guide.

Trait Implementations

impl Clone for AssumeRoleWithSAMLFluentBuilder

fn clone(&self) -> AssumeRoleWithSAMLFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for AssumeRoleWithSAMLFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.