Enum aws_sdk_sqs::Error

#[non_exhaustive]
pub enum Error {
    BatchEntryIdsNotDistinct(BatchEntryIdsNotDistinct),
    BatchRequestTooLong(BatchRequestTooLong),
    EmptyBatchRequest(EmptyBatchRequest),
    InvalidAttributeName(InvalidAttributeName),
    InvalidBatchEntryId(InvalidBatchEntryId),
    InvalidIdFormat(InvalidIdFormat),
    InvalidMessageContents(InvalidMessageContents),
    MessageNotInflight(MessageNotInflight),
    OverLimit(OverLimit),
    PurgeQueueInProgress(PurgeQueueInProgress),
    QueueDeletedRecently(QueueDeletedRecently),
    QueueDoesNotExist(QueueDoesNotExist),
    QueueNameExists(QueueNameExists),
    ReceiptHandleIsInvalid(ReceiptHandleIsInvalid),
    TooManyEntriesInBatchRequest(TooManyEntriesInBatchRequest),
    UnsupportedOperation(UnsupportedOperation),
    Unhandled(Unhandled),
}

All possible error types for this service.

Variants (Non-exhaustive)

Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.

BatchEntryIdsNotDistinct(BatchEntryIdsNotDistinct)

Two or more batch entries in the request have the same Id.

BatchRequestTooLong(BatchRequestTooLong)

The length of all the messages put together is more than the limit.

EmptyBatchRequest(EmptyBatchRequest)

The batch request doesn't contain any entries.

InvalidAttributeName(InvalidAttributeName)

The specified attribute doesn't exist.

InvalidBatchEntryId(InvalidBatchEntryId)

The Id of a batch entry in a batch request doesn't abide by the specification.

InvalidIdFormat(InvalidIdFormat)

The specified receipt handle isn't valid for the current version.

InvalidMessageContents(InvalidMessageContents)

The message contains characters outside the allowed set.

MessageNotInflight(MessageNotInflight)

The specified message isn't in flight.

OverLimit(OverLimit)

The specified action violates a limit. For example, ReceiveMessage returns this error if the maximum number of inflight messages is reached and AddPermission returns this error if the maximum number of permissions for the queue is reached.

PurgeQueueInProgress(PurgeQueueInProgress)

Indicates that the specified queue previously received a PurgeQueue request within the last 60 seconds (the time it can take to delete the messages in the queue).

QueueDeletedRecently(QueueDeletedRecently)

You must wait 60 seconds after deleting a queue before you can create another queue with the same name.

QueueDoesNotExist(QueueDoesNotExist)

The specified queue doesn't exist.

QueueNameExists(QueueNameExists)

A queue with this name already exists. Amazon SQS returns this error only if the request includes attributes whose values differ from those of the existing queue.

ReceiptHandleIsInvalid(ReceiptHandleIsInvalid)

The specified receipt handle isn't valid.

TooManyEntriesInBatchRequest(TooManyEntriesInBatchRequest)

The batch request contains more entries than permissible.

UnsupportedOperation(UnsupportedOperation)

Error code 400. Unsupported operation.

Unhandled(Unhandled)

An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).

When logging an error from the SDK, it is recommended that you either wrap the error in DisplayErrorContext, use another error reporter library that visits the error’s cause/source chain, or call Error::source for more details about the underlying cause.

Trait Implementations

impl Debug for Error

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Display for Error

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Error for Error

fn source(&self) -> Option<&(dyn Error + 'static)>

The lower-level source of this error, if any.

fn description(&self) -> &str

👎Deprecated since 1.42.0: use the Display impl or to_string()

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0: replaced by Error::source, which can support downcasting

fn provide<'a>(&'a self, demand: &mut Demand<'a>)

🔬This is a nightly-only experimental API. (error_generic_member_access)

Provides type based access to context intended for error reports.

impl From<AddPermissionError> for Error

fn from(err: AddPermissionError) -> Self

Converts to this type from the input type.

impl From<ChangeMessageVisibilityBatchError> for Error

fn from(err: ChangeMessageVisibilityBatchError) -> Self

Converts to this type from the input type.

impl From<ChangeMessageVisibilityError> for Error

fn from(err: ChangeMessageVisibilityError) -> Self

Converts to this type from the input type.

impl From<CreateQueueError> for Error

fn from(err: CreateQueueError) -> Self

Converts to this type from the input type.

impl From<DeleteMessageBatchError> for Error

fn from(err: DeleteMessageBatchError) -> Self

Converts to this type from the input type.

impl From<DeleteMessageError> for Error

fn from(err: DeleteMessageError) -> Self

Converts to this type from the input type.

impl From<DeleteQueueError> for Error

fn from(err: DeleteQueueError) -> Self

Converts to this type from the input type.

impl From<GetQueueAttributesError> for Error

fn from(err: GetQueueAttributesError) -> Self

Converts to this type from the input type.

impl From<GetQueueUrlError> for Error

fn from(err: GetQueueUrlError) -> Self

Converts to this type from the input type.

impl From<ListDeadLetterSourceQueuesError> for Error

fn from(err: ListDeadLetterSourceQueuesError) -> Self

Converts to this type from the input type.

impl From<ListQueueTagsError> for Error

fn from(err: ListQueueTagsError) -> Self

Converts to this type from the input type.

impl From<ListQueuesError> for Error

fn from(err: ListQueuesError) -> Self

Converts to this type from the input type.

impl From<PurgeQueueError> for Error

fn from(err: PurgeQueueError) -> Self

Converts to this type from the input type.

impl From<ReceiveMessageError> for Error

fn from(err: ReceiveMessageError) -> Self

Converts to this type from the input type.

impl From<RemovePermissionError> for Error

fn from(err: RemovePermissionError) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<AddPermissionError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<AddPermissionError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<ChangeMessageVisibilityBatchError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<ChangeMessageVisibilityBatchError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<ChangeMessageVisibilityError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<ChangeMessageVisibilityError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<CreateQueueError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<CreateQueueError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<DeleteMessageBatchError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<DeleteMessageBatchError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<DeleteMessageError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<DeleteMessageError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<DeleteQueueError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<DeleteQueueError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<GetQueueAttributesError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<GetQueueAttributesError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<GetQueueUrlError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<GetQueueUrlError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<ListDeadLetterSourceQueuesError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<ListDeadLetterSourceQueuesError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<ListQueueTagsError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<ListQueueTagsError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<ListQueuesError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<ListQueuesError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<PurgeQueueError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<PurgeQueueError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<ReceiveMessageError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<ReceiveMessageError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<RemovePermissionError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<RemovePermissionError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<SendMessageBatchError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<SendMessageBatchError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<SendMessageError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<SendMessageError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<SetQueueAttributesError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<SetQueueAttributesError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<TagQueueError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<TagQueueError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<UntagQueueError, R>> for Errorwhere
    R: Send + Sync + Debug + 'static,

fn from(err: SdkError<UntagQueueError, R>) -> Self

Converts to this type from the input type.

impl From<SendMessageBatchError> for Error

fn from(err: SendMessageBatchError) -> Self

Converts to this type from the input type.

impl From<SendMessageError> for Error

fn from(err: SendMessageError) -> Self

Converts to this type from the input type.

impl From<SetQueueAttributesError> for Error

fn from(err: SetQueueAttributesError) -> Self

Converts to this type from the input type.

impl From<TagQueueError> for Error

fn from(err: TagQueueError) -> Self

Converts to this type from the input type.

impl From<UntagQueueError> for Error

fn from(err: UntagQueueError) -> Self

Converts to this type from the input type.