Struct aws_sdk_s3::types::builders::ReplicationRuleBuilder
source · #[non_exhaustive]pub struct ReplicationRuleBuilder { /* private fields */ }
Expand description
A builder for ReplicationRule
.
Implementations§
source§impl ReplicationRuleBuilder
impl ReplicationRuleBuilder
sourcepub fn id(self, input: impl Into<String>) -> Self
pub fn id(self, input: impl Into<String>) -> Self
A unique identifier for the rule. The maximum value is 255 characters.
sourcepub fn set_id(self, input: Option<String>) -> Self
pub fn set_id(self, input: Option<String>) -> Self
A unique identifier for the rule. The maximum value is 255 characters.
sourcepub fn get_id(&self) -> &Option<String>
pub fn get_id(&self) -> &Option<String>
A unique identifier for the rule. The maximum value is 255 characters.
sourcepub fn priority(self, input: i32) -> Self
pub fn priority(self, input: i32) -> Self
The priority indicates which rule has precedence whenever two or more replication rules conflict. Amazon S3 will attempt to replicate objects according to all replication rules. However, if there are two or more rules with the same destination bucket, then objects will be replicated according to the rule with the highest priority. The higher the number, the higher the priority.
For more information, see Replication in the Amazon S3 User Guide.
sourcepub fn set_priority(self, input: Option<i32>) -> Self
pub fn set_priority(self, input: Option<i32>) -> Self
The priority indicates which rule has precedence whenever two or more replication rules conflict. Amazon S3 will attempt to replicate objects according to all replication rules. However, if there are two or more rules with the same destination bucket, then objects will be replicated according to the rule with the highest priority. The higher the number, the higher the priority.
For more information, see Replication in the Amazon S3 User Guide.
sourcepub fn get_priority(&self) -> &Option<i32>
pub fn get_priority(&self) -> &Option<i32>
The priority indicates which rule has precedence whenever two or more replication rules conflict. Amazon S3 will attempt to replicate objects according to all replication rules. However, if there are two or more rules with the same destination bucket, then objects will be replicated according to the rule with the highest priority. The higher the number, the higher the priority.
For more information, see Replication in the Amazon S3 User Guide.
sourcepub fn prefix(self, input: impl Into<String>) -> Self
👎Deprecated
pub fn prefix(self, input: impl Into<String>) -> Self
An object key name prefix that identifies the object or objects to which the rule applies. The maximum prefix length is 1,024 characters. To include all objects in a bucket, specify an empty string.
Replacement must be made for object keys containing special characters (such as carriage returns) when using XML requests. For more information, see XML related object key constraints.
sourcepub fn set_prefix(self, input: Option<String>) -> Self
👎Deprecated
pub fn set_prefix(self, input: Option<String>) -> Self
An object key name prefix that identifies the object or objects to which the rule applies. The maximum prefix length is 1,024 characters. To include all objects in a bucket, specify an empty string.
Replacement must be made for object keys containing special characters (such as carriage returns) when using XML requests. For more information, see XML related object key constraints.
sourcepub fn get_prefix(&self) -> &Option<String>
👎Deprecated
pub fn get_prefix(&self) -> &Option<String>
An object key name prefix that identifies the object or objects to which the rule applies. The maximum prefix length is 1,024 characters. To include all objects in a bucket, specify an empty string.
Replacement must be made for object keys containing special characters (such as carriage returns) when using XML requests. For more information, see XML related object key constraints.
sourcepub fn filter(self, input: ReplicationRuleFilter) -> Self
pub fn filter(self, input: ReplicationRuleFilter) -> Self
A filter that identifies the subset of objects to which the replication rule applies. A Filter
must specify exactly one Prefix
, Tag
, or an And
child element.
sourcepub fn set_filter(self, input: Option<ReplicationRuleFilter>) -> Self
pub fn set_filter(self, input: Option<ReplicationRuleFilter>) -> Self
A filter that identifies the subset of objects to which the replication rule applies. A Filter
must specify exactly one Prefix
, Tag
, or an And
child element.
sourcepub fn get_filter(&self) -> &Option<ReplicationRuleFilter>
pub fn get_filter(&self) -> &Option<ReplicationRuleFilter>
A filter that identifies the subset of objects to which the replication rule applies. A Filter
must specify exactly one Prefix
, Tag
, or an And
child element.
sourcepub fn status(self, input: ReplicationRuleStatus) -> Self
pub fn status(self, input: ReplicationRuleStatus) -> Self
Specifies whether the rule is enabled.
This field is required.sourcepub fn set_status(self, input: Option<ReplicationRuleStatus>) -> Self
pub fn set_status(self, input: Option<ReplicationRuleStatus>) -> Self
Specifies whether the rule is enabled.
sourcepub fn get_status(&self) -> &Option<ReplicationRuleStatus>
pub fn get_status(&self) -> &Option<ReplicationRuleStatus>
Specifies whether the rule is enabled.
sourcepub fn source_selection_criteria(self, input: SourceSelectionCriteria) -> Self
pub fn source_selection_criteria(self, input: SourceSelectionCriteria) -> Self
A container that describes additional filters for identifying the source objects that you want to replicate. You can choose to enable or disable the replication of these objects. Currently, Amazon S3 supports only the filter that you can specify for objects created with server-side encryption using a customer managed key stored in Amazon Web Services Key Management Service (SSE-KMS).
sourcepub fn set_source_selection_criteria(
self,
input: Option<SourceSelectionCriteria>,
) -> Self
pub fn set_source_selection_criteria( self, input: Option<SourceSelectionCriteria>, ) -> Self
A container that describes additional filters for identifying the source objects that you want to replicate. You can choose to enable or disable the replication of these objects. Currently, Amazon S3 supports only the filter that you can specify for objects created with server-side encryption using a customer managed key stored in Amazon Web Services Key Management Service (SSE-KMS).
sourcepub fn get_source_selection_criteria(&self) -> &Option<SourceSelectionCriteria>
pub fn get_source_selection_criteria(&self) -> &Option<SourceSelectionCriteria>
A container that describes additional filters for identifying the source objects that you want to replicate. You can choose to enable or disable the replication of these objects. Currently, Amazon S3 supports only the filter that you can specify for objects created with server-side encryption using a customer managed key stored in Amazon Web Services Key Management Service (SSE-KMS).
sourcepub fn existing_object_replication(
self,
input: ExistingObjectReplication,
) -> Self
pub fn existing_object_replication( self, input: ExistingObjectReplication, ) -> Self
Optional configuration to replicate existing source bucket objects. For more information, see Replicating Existing Objects in the Amazon S3 User Guide.
sourcepub fn set_existing_object_replication(
self,
input: Option<ExistingObjectReplication>,
) -> Self
pub fn set_existing_object_replication( self, input: Option<ExistingObjectReplication>, ) -> Self
Optional configuration to replicate existing source bucket objects. For more information, see Replicating Existing Objects in the Amazon S3 User Guide.
sourcepub fn get_existing_object_replication(
&self,
) -> &Option<ExistingObjectReplication>
pub fn get_existing_object_replication( &self, ) -> &Option<ExistingObjectReplication>
Optional configuration to replicate existing source bucket objects. For more information, see Replicating Existing Objects in the Amazon S3 User Guide.
sourcepub fn destination(self, input: Destination) -> Self
pub fn destination(self, input: Destination) -> Self
A container for information about the replication destination and its configurations including enabling the S3 Replication Time Control (S3 RTC).
This field is required.sourcepub fn set_destination(self, input: Option<Destination>) -> Self
pub fn set_destination(self, input: Option<Destination>) -> Self
A container for information about the replication destination and its configurations including enabling the S3 Replication Time Control (S3 RTC).
sourcepub fn get_destination(&self) -> &Option<Destination>
pub fn get_destination(&self) -> &Option<Destination>
A container for information about the replication destination and its configurations including enabling the S3 Replication Time Control (S3 RTC).
sourcepub fn delete_marker_replication(self, input: DeleteMarkerReplication) -> Self
pub fn delete_marker_replication(self, input: DeleteMarkerReplication) -> Self
Specifies whether Amazon S3 replicates delete markers. If you specify a Filter
in your replication configuration, you must also include a DeleteMarkerReplication
element. If your Filter
includes a Tag
element, the DeleteMarkerReplication
Status
must be set to Disabled, because Amazon S3 does not support replicating delete markers for tag-based rules. For an example configuration, see Basic Rule Configuration.
For more information about delete marker replication, see Basic Rule Configuration.
If you are using an earlier version of the replication configuration, Amazon S3 handles replication of delete markers differently. For more information, see Backward Compatibility.
sourcepub fn set_delete_marker_replication(
self,
input: Option<DeleteMarkerReplication>,
) -> Self
pub fn set_delete_marker_replication( self, input: Option<DeleteMarkerReplication>, ) -> Self
Specifies whether Amazon S3 replicates delete markers. If you specify a Filter
in your replication configuration, you must also include a DeleteMarkerReplication
element. If your Filter
includes a Tag
element, the DeleteMarkerReplication
Status
must be set to Disabled, because Amazon S3 does not support replicating delete markers for tag-based rules. For an example configuration, see Basic Rule Configuration.
For more information about delete marker replication, see Basic Rule Configuration.
If you are using an earlier version of the replication configuration, Amazon S3 handles replication of delete markers differently. For more information, see Backward Compatibility.
sourcepub fn get_delete_marker_replication(&self) -> &Option<DeleteMarkerReplication>
pub fn get_delete_marker_replication(&self) -> &Option<DeleteMarkerReplication>
Specifies whether Amazon S3 replicates delete markers. If you specify a Filter
in your replication configuration, you must also include a DeleteMarkerReplication
element. If your Filter
includes a Tag
element, the DeleteMarkerReplication
Status
must be set to Disabled, because Amazon S3 does not support replicating delete markers for tag-based rules. For an example configuration, see Basic Rule Configuration.
For more information about delete marker replication, see Basic Rule Configuration.
If you are using an earlier version of the replication configuration, Amazon S3 handles replication of delete markers differently. For more information, see Backward Compatibility.
sourcepub fn build(self) -> Result<ReplicationRule, BuildError>
pub fn build(self) -> Result<ReplicationRule, BuildError>
Consumes the builder and constructs a ReplicationRule
.
This method will fail if any of the following fields are not set:
Trait Implementations§
source§impl Clone for ReplicationRuleBuilder
impl Clone for ReplicationRuleBuilder
source§fn clone(&self) -> ReplicationRuleBuilder
fn clone(&self) -> ReplicationRuleBuilder
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresource§impl Debug for ReplicationRuleBuilder
impl Debug for ReplicationRuleBuilder
source§impl Default for ReplicationRuleBuilder
impl Default for ReplicationRuleBuilder
source§fn default() -> ReplicationRuleBuilder
fn default() -> ReplicationRuleBuilder
source§impl PartialEq for ReplicationRuleBuilder
impl PartialEq for ReplicationRuleBuilder
impl StructuralPartialEq for ReplicationRuleBuilder
Auto Trait Implementations§
impl Freeze for ReplicationRuleBuilder
impl RefUnwindSafe for ReplicationRuleBuilder
impl Send for ReplicationRuleBuilder
impl Sync for ReplicationRuleBuilder
impl Unpin for ReplicationRuleBuilder
impl UnwindSafe for ReplicationRuleBuilder
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§default unsafe fn clone_to_uninit(&self, dst: *mut T)
default unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit
)