pub struct PutObjectAclFluentBuilder { /* private fields */ }
Expand description
Fluent builder constructing a request to PutObjectAcl
.
This operation is not supported by directory buckets.
Uses the acl
subresource to set the access control list (ACL) permissions for a new or existing object in an S3 bucket. You must have the WRITE_ACP
permission to set the ACL of an object. For more information, see What permissions can I grant? in the Amazon S3 User Guide.
This functionality is not supported for Amazon S3 on Outposts.
Depending on your application needs, you can choose to set the ACL on an object using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, you can continue to use that approach. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.
If your bucket uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. You must use policies to grant access to your bucket and the objects in it. Requests to set ACLs or update ACLs fail and return the AccessControlListNotSupported
error code. Requests to read ACLs are still supported. For more information, see Controlling object ownership in the Amazon S3 User Guide.
- Permissions
-
You can set access permissions using one of the following methods:
-
Specify a canned ACL with the
x-amz-acl
request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value ofx-amz-ac
l. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL. -
Specify access permissions explicitly with the
x-amz-grant-read
,x-amz-grant-read-acp
,x-amz-grant-write-acp
, andx-amz-grant-full-control
headers. When using these headers, you specify explicit access permissions and grantees (Amazon Web Services accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot usex-amz-acl
header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview.You specify each grantee as a type=value pair, where the type is one of the following:
-
id
– if the value specified is the canonical user ID of an Amazon Web Services account -
uri
– if you are granting permissions to a predefined group -
emailAddress
– if the value specified is the email address of an Amazon Web Services accountUsing email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:
-
US East (N. Virginia)
-
US West (N. California)
-
US West (Oregon)
-
Asia Pacific (Singapore)
-
Asia Pacific (Sydney)
-
Asia Pacific (Tokyo)
-
Europe (Ireland)
-
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.
-
For example, the following
x-amz-grant-read
header grants list objects permission to the two Amazon Web Services accounts identified by their email addresses.x-amz-grant-read: emailAddress="xyz@amazon.com", emailAddress="abc@amazon.com"
-
You can use either a canned ACL or specify access permissions explicitly. You cannot do both.
-
- Grantee Values
-
You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:
-
By the person's ID:
<>ID<> <>GranteesEmail<> DisplayName is optional and ignored in the request.
-
By URI:
<>http://acs.amazonaws.com/groups/global/AuthenticatedUsers<> -
By Email address:
<>Grantees@email.com<> lt;/Grantee>The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.
Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:
-
US East (N. Virginia)
-
US West (N. California)
-
US West (Oregon)
-
Asia Pacific (Singapore)
-
Asia Pacific (Sydney)
-
Asia Pacific (Tokyo)
-
Europe (Ireland)
-
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.
-
-
- Versioning
-
The ACL of an object is set at the object version level. By default, PUT sets the ACL of the current version of an object. To set the ACL of a different version, use the
versionId
subresource.
The following operations are related to PutObjectAcl
:
Implementations§
source§impl PutObjectAclFluentBuilder
impl PutObjectAclFluentBuilder
sourcepub fn as_input(&self) -> &PutObjectAclInputBuilder
pub fn as_input(&self) -> &PutObjectAclInputBuilder
Access the PutObjectAcl as a reference.
sourcepub async fn send(
self,
) -> Result<PutObjectAclOutput, SdkError<PutObjectAclError, HttpResponse>>
pub async fn send( self, ) -> Result<PutObjectAclOutput, SdkError<PutObjectAclError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn customize(
self,
) -> CustomizableOperation<PutObjectAclOutput, PutObjectAclError, Self>
pub fn customize( self, ) -> CustomizableOperation<PutObjectAclOutput, PutObjectAclError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
sourcepub fn acl(self, input: ObjectCannedAcl) -> Self
pub fn acl(self, input: ObjectCannedAcl) -> Self
The canned ACL to apply to the object. For more information, see Canned ACL.
sourcepub fn set_acl(self, input: Option<ObjectCannedAcl>) -> Self
pub fn set_acl(self, input: Option<ObjectCannedAcl>) -> Self
The canned ACL to apply to the object. For more information, see Canned ACL.
sourcepub fn get_acl(&self) -> &Option<ObjectCannedAcl>
pub fn get_acl(&self) -> &Option<ObjectCannedAcl>
The canned ACL to apply to the object. For more information, see Canned ACL.
sourcepub fn access_control_policy(self, input: AccessControlPolicy) -> Self
pub fn access_control_policy(self, input: AccessControlPolicy) -> Self
Contains the elements that set the ACL permissions for an object per grantee.
sourcepub fn set_access_control_policy(
self,
input: Option<AccessControlPolicy>,
) -> Self
pub fn set_access_control_policy( self, input: Option<AccessControlPolicy>, ) -> Self
Contains the elements that set the ACL permissions for an object per grantee.
sourcepub fn get_access_control_policy(&self) -> &Option<AccessControlPolicy>
pub fn get_access_control_policy(&self) -> &Option<AccessControlPolicy>
Contains the elements that set the ACL permissions for an object per grantee.
sourcepub fn bucket(self, input: impl Into<String>) -> Self
pub fn bucket(self, input: impl Into<String>) -> Self
The bucket name that contains the object to which you want to attach the ACL.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn set_bucket(self, input: Option<String>) -> Self
pub fn set_bucket(self, input: Option<String>) -> Self
The bucket name that contains the object to which you want to attach the ACL.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn get_bucket(&self) -> &Option<String>
pub fn get_bucket(&self) -> &Option<String>
The bucket name that contains the object to which you want to attach the ACL.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn content_md5(self, input: impl Into<String>) -> Self
pub fn content_md5(self, input: impl Into<String>) -> Self
The base64-encoded 128-bit MD5 digest of the data. This header must be used as a message integrity check to verify that the request body was not corrupted in transit. For more information, go to RFC 1864.>
For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.
sourcepub fn set_content_md5(self, input: Option<String>) -> Self
pub fn set_content_md5(self, input: Option<String>) -> Self
The base64-encoded 128-bit MD5 digest of the data. This header must be used as a message integrity check to verify that the request body was not corrupted in transit. For more information, go to RFC 1864.>
For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.
sourcepub fn get_content_md5(&self) -> &Option<String>
pub fn get_content_md5(&self) -> &Option<String>
The base64-encoded 128-bit MD5 digest of the data. This header must be used as a message integrity check to verify that the request body was not corrupted in transit. For more information, go to RFC 1864.>
For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.
sourcepub fn checksum_algorithm(self, input: ChecksumAlgorithm) -> Self
pub fn checksum_algorithm(self, input: ChecksumAlgorithm) -> Self
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum
or x-amz-trailer
header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request
. For more information, see Checking object integrity in the Amazon S3 User Guide.
If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm
parameter.
sourcepub fn set_checksum_algorithm(self, input: Option<ChecksumAlgorithm>) -> Self
pub fn set_checksum_algorithm(self, input: Option<ChecksumAlgorithm>) -> Self
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum
or x-amz-trailer
header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request
. For more information, see Checking object integrity in the Amazon S3 User Guide.
If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm
parameter.
sourcepub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>
pub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum
or x-amz-trailer
header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request
. For more information, see Checking object integrity in the Amazon S3 User Guide.
If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm
parameter.
sourcepub fn grant_full_control(self, input: impl Into<String>) -> Self
pub fn grant_full_control(self, input: impl Into<String>) -> Self
Allows grantee the read, write, read ACP, and write ACP permissions on the bucket.
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn set_grant_full_control(self, input: Option<String>) -> Self
pub fn set_grant_full_control(self, input: Option<String>) -> Self
Allows grantee the read, write, read ACP, and write ACP permissions on the bucket.
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn get_grant_full_control(&self) -> &Option<String>
pub fn get_grant_full_control(&self) -> &Option<String>
Allows grantee the read, write, read ACP, and write ACP permissions on the bucket.
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn grant_read(self, input: impl Into<String>) -> Self
pub fn grant_read(self, input: impl Into<String>) -> Self
Allows grantee to list the objects in the bucket.
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn set_grant_read(self, input: Option<String>) -> Self
pub fn set_grant_read(self, input: Option<String>) -> Self
Allows grantee to list the objects in the bucket.
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn get_grant_read(&self) -> &Option<String>
pub fn get_grant_read(&self) -> &Option<String>
Allows grantee to list the objects in the bucket.
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn grant_read_acp(self, input: impl Into<String>) -> Self
pub fn grant_read_acp(self, input: impl Into<String>) -> Self
Allows grantee to read the bucket ACL.
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn set_grant_read_acp(self, input: Option<String>) -> Self
pub fn set_grant_read_acp(self, input: Option<String>) -> Self
Allows grantee to read the bucket ACL.
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn get_grant_read_acp(&self) -> &Option<String>
pub fn get_grant_read_acp(&self) -> &Option<String>
Allows grantee to read the bucket ACL.
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn grant_write(self, input: impl Into<String>) -> Self
pub fn grant_write(self, input: impl Into<String>) -> Self
Allows grantee to create new objects in the bucket.
For the bucket and object owners of existing objects, also allows deletions and overwrites of those objects.
sourcepub fn set_grant_write(self, input: Option<String>) -> Self
pub fn set_grant_write(self, input: Option<String>) -> Self
Allows grantee to create new objects in the bucket.
For the bucket and object owners of existing objects, also allows deletions and overwrites of those objects.
sourcepub fn get_grant_write(&self) -> &Option<String>
pub fn get_grant_write(&self) -> &Option<String>
Allows grantee to create new objects in the bucket.
For the bucket and object owners of existing objects, also allows deletions and overwrites of those objects.
sourcepub fn grant_write_acp(self, input: impl Into<String>) -> Self
pub fn grant_write_acp(self, input: impl Into<String>) -> Self
Allows grantee to write the ACL for the applicable bucket.
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn set_grant_write_acp(self, input: Option<String>) -> Self
pub fn set_grant_write_acp(self, input: Option<String>) -> Self
Allows grantee to write the ACL for the applicable bucket.
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn get_grant_write_acp(&self) -> &Option<String>
pub fn get_grant_write_acp(&self) -> &Option<String>
Allows grantee to write the ACL for the applicable bucket.
This functionality is not supported for Amazon S3 on Outposts.
sourcepub fn set_key(self, input: Option<String>) -> Self
pub fn set_key(self, input: Option<String>) -> Self
Key for which the PUT action was initiated.
sourcepub fn request_payer(self, input: RequestPayer) -> Self
pub fn request_payer(self, input: RequestPayer) -> Self
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn set_request_payer(self, input: Option<RequestPayer>) -> Self
pub fn set_request_payer(self, input: Option<RequestPayer>) -> Self
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn get_request_payer(&self) -> &Option<RequestPayer>
pub fn get_request_payer(&self) -> &Option<RequestPayer>
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn version_id(self, input: impl Into<String>) -> Self
pub fn version_id(self, input: impl Into<String>) -> Self
Version ID used to reference a specific version of the object.
This functionality is not supported for directory buckets.
sourcepub fn set_version_id(self, input: Option<String>) -> Self
pub fn set_version_id(self, input: Option<String>) -> Self
Version ID used to reference a specific version of the object.
This functionality is not supported for directory buckets.
sourcepub fn get_version_id(&self) -> &Option<String>
pub fn get_version_id(&self) -> &Option<String>
Version ID used to reference a specific version of the object.
This functionality is not supported for directory buckets.
sourcepub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn get_expected_bucket_owner(&self) -> &Option<String>
pub fn get_expected_bucket_owner(&self) -> &Option<String>
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
Trait Implementations§
source§impl Clone for PutObjectAclFluentBuilder
impl Clone for PutObjectAclFluentBuilder
source§fn clone(&self) -> PutObjectAclFluentBuilder
fn clone(&self) -> PutObjectAclFluentBuilder
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreAuto Trait Implementations§
impl Freeze for PutObjectAclFluentBuilder
impl !RefUnwindSafe for PutObjectAclFluentBuilder
impl Send for PutObjectAclFluentBuilder
impl Sync for PutObjectAclFluentBuilder
impl Unpin for PutObjectAclFluentBuilder
impl !UnwindSafe for PutObjectAclFluentBuilder
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§default unsafe fn clone_to_uninit(&self, dst: *mut T)
default unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit
)