pub struct PutBucketTaggingFluentBuilder { /* private fields */ }
Expand description
Fluent builder constructing a request to PutBucketTagging
.
This operation is not supported by directory buckets.
Sets the tags for a bucket.
Use tags to organize your Amazon Web Services bill to reflect your own cost structure. To do this, sign up to get your Amazon Web Services account bill with tag key values included. Then, to see the cost of combined resources, organize your billing information according to resources with the same tag key values. For example, you can tag several resources with a specific application name, and then organize your billing information to see the total cost of that application across several services. For more information, see Cost Allocation and Tagging and Using Cost Allocation in Amazon S3 Bucket Tags.
When this operation sets the tags for a bucket, it will overwrite any current tags the bucket already has. You cannot use this operation to add tags to an existing list of tags.
To use this operation, you must have permissions to perform the s3:PutBucketTagging
action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
PutBucketTagging
has the following special errors. For more Amazon S3 errors see, Error Responses.
-
InvalidTag
- The tag provided was not a valid tag. This error can occur if the tag did not pass input validation. For more information, see Using Cost Allocation in Amazon S3 Bucket Tags. -
MalformedXML
- The XML provided does not match the schema. -
OperationAborted
- A conflicting conditional action is currently in progress against this resource. Please try again. -
InternalError
- The service was unable to apply the provided tag to the bucket.
The following operations are related to PutBucketTagging
:
Implementations§
source§impl PutBucketTaggingFluentBuilder
impl PutBucketTaggingFluentBuilder
sourcepub fn as_input(&self) -> &PutBucketTaggingInputBuilder
pub fn as_input(&self) -> &PutBucketTaggingInputBuilder
Access the PutBucketTagging as a reference.
sourcepub async fn send(
self
) -> Result<PutBucketTaggingOutput, SdkError<PutBucketTaggingError, HttpResponse>>
pub async fn send( self ) -> Result<PutBucketTaggingOutput, SdkError<PutBucketTaggingError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn customize(
self
) -> CustomizableOperation<PutBucketTaggingOutput, PutBucketTaggingError, Self>
pub fn customize( self ) -> CustomizableOperation<PutBucketTaggingOutput, PutBucketTaggingError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
sourcepub fn set_bucket(self, input: Option<String>) -> Self
pub fn set_bucket(self, input: Option<String>) -> Self
The bucket name.
sourcepub fn get_bucket(&self) -> &Option<String>
pub fn get_bucket(&self) -> &Option<String>
The bucket name.
sourcepub fn content_md5(self, input: impl Into<String>) -> Self
pub fn content_md5(self, input: impl Into<String>) -> Self
The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message integrity check to verify that the request body was not corrupted in transit. For more information, see RFC 1864.
For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.
sourcepub fn set_content_md5(self, input: Option<String>) -> Self
pub fn set_content_md5(self, input: Option<String>) -> Self
The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message integrity check to verify that the request body was not corrupted in transit. For more information, see RFC 1864.
For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.
sourcepub fn get_content_md5(&self) -> &Option<String>
pub fn get_content_md5(&self) -> &Option<String>
The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message integrity check to verify that the request body was not corrupted in transit. For more information, see RFC 1864.
For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.
sourcepub fn checksum_algorithm(self, input: ChecksumAlgorithm) -> Self
pub fn checksum_algorithm(self, input: ChecksumAlgorithm) -> Self
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum
or x-amz-trailer
header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request
. For more information, see Checking object integrity in the Amazon S3 User Guide.
If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm
parameter.
sourcepub fn set_checksum_algorithm(self, input: Option<ChecksumAlgorithm>) -> Self
pub fn set_checksum_algorithm(self, input: Option<ChecksumAlgorithm>) -> Self
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum
or x-amz-trailer
header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request
. For more information, see Checking object integrity in the Amazon S3 User Guide.
If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm
parameter.
sourcepub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>
pub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum
or x-amz-trailer
header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request
. For more information, see Checking object integrity in the Amazon S3 User Guide.
If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm
parameter.
sourcepub fn set_tagging(self, input: Option<Tagging>) -> Self
pub fn set_tagging(self, input: Option<Tagging>) -> Self
Container for the TagSet
and Tag
elements.
sourcepub fn get_tagging(&self) -> &Option<Tagging>
pub fn get_tagging(&self) -> &Option<Tagging>
Container for the TagSet
and Tag
elements.
sourcepub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn get_expected_bucket_owner(&self) -> &Option<String>
pub fn get_expected_bucket_owner(&self) -> &Option<String>
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
Trait Implementations§
source§impl Clone for PutBucketTaggingFluentBuilder
impl Clone for PutBucketTaggingFluentBuilder
source§fn clone(&self) -> PutBucketTaggingFluentBuilder
fn clone(&self) -> PutBucketTaggingFluentBuilder
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read more