Struct aws_sdk_s3::operation::list_object_versions::builders::ListObjectVersionsInputBuilder

#[non_exhaustive]
pub struct ListObjectVersionsInputBuilder { /* private fields */ }

A builder for ListObjectVersionsInput.

Implementations

impl ListObjectVersionsInputBuilder

pub fn bucket(self, input: impl Into<String>) -> Self

The bucket name that contains the objects.

This field is required.

pub fn set_bucket(self, input: Option<String>) -> Self

The bucket name that contains the objects.

pub fn get_bucket(&self) -> &Option<String>

The bucket name that contains the objects.

pub fn delimiter(self, input: impl Into<String>) -> Self

A delimiter is a character that you specify to group keys. All keys that contain the same string between the prefix and the first occurrence of the delimiter are grouped under a single result element in CommonPrefixes. These groups are counted as one result against the max-keys limitation. These keys are not returned elsewhere in the response.

pub fn set_delimiter(self, input: Option<String>) -> Self

A delimiter is a character that you specify to group keys. All keys that contain the same string between the prefix and the first occurrence of the delimiter are grouped under a single result element in CommonPrefixes. These groups are counted as one result against the max-keys limitation. These keys are not returned elsewhere in the response.

pub fn get_delimiter(&self) -> &Option<String>

A delimiter is a character that you specify to group keys. All keys that contain the same string between the prefix and the first occurrence of the delimiter are grouped under a single result element in CommonPrefixes. These groups are counted as one result against the max-keys limitation. These keys are not returned elsewhere in the response.

pub fn encoding_type(self, input: EncodingType) -> Self

Requests Amazon S3 to encode the object keys in the response and specifies the encoding method to use. An object key can contain any Unicode character; however, the XML 1.0 parser cannot parse some characters, such as characters with an ASCII value from 0 to 10. For characters that are not supported in XML 1.0, you can add this parameter to request that Amazon S3 encode the keys in the response.

pub fn set_encoding_type(self, input: Option<EncodingType>) -> Self

Requests Amazon S3 to encode the object keys in the response and specifies the encoding method to use. An object key can contain any Unicode character; however, the XML 1.0 parser cannot parse some characters, such as characters with an ASCII value from 0 to 10. For characters that are not supported in XML 1.0, you can add this parameter to request that Amazon S3 encode the keys in the response.

pub fn get_encoding_type(&self) -> &Option<EncodingType>

Requests Amazon S3 to encode the object keys in the response and specifies the encoding method to use. An object key can contain any Unicode character; however, the XML 1.0 parser cannot parse some characters, such as characters with an ASCII value from 0 to 10. For characters that are not supported in XML 1.0, you can add this parameter to request that Amazon S3 encode the keys in the response.

pub fn key_marker(self, input: impl Into<String>) -> Self

Specifies the key to start with when listing objects in a bucket.

pub fn set_key_marker(self, input: Option<String>) -> Self

Specifies the key to start with when listing objects in a bucket.

pub fn get_key_marker(&self) -> &Option<String>

Specifies the key to start with when listing objects in a bucket.

pub fn max_keys(self, input: i32) -> Self

Sets the maximum number of keys returned in the response. By default, the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more. If additional keys satisfy the search criteria, but were not returned because max-keys was exceeded, the response contains true . To return the additional keys, see key-marker and version-id-marker.

pub fn set_max_keys(self, input: Option<i32>) -> Self

Sets the maximum number of keys returned in the response. By default, the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more. If additional keys satisfy the search criteria, but were not returned because max-keys was exceeded, the response contains true . To return the additional keys, see key-marker and version-id-marker.

pub fn get_max_keys(&self) -> &Option<i32>

Sets the maximum number of keys returned in the response. By default, the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more. If additional keys satisfy the search criteria, but were not returned because max-keys was exceeded, the response contains true . To return the additional keys, see key-marker and version-id-marker.

pub fn prefix(self, input: impl Into<String>) -> Self

Use this parameter to select only those keys that begin with the specified prefix. You can use prefixes to separate a bucket into different groupings of keys. (You can think of using prefix to make groups in the same way that you'd use a folder in a file system.) You can use prefix with delimiter to roll up numerous objects into a single result under CommonPrefixes.

pub fn set_prefix(self, input: Option<String>) -> Self

Use this parameter to select only those keys that begin with the specified prefix. You can use prefixes to separate a bucket into different groupings of keys. (You can think of using prefix to make groups in the same way that you'd use a folder in a file system.) You can use prefix with delimiter to roll up numerous objects into a single result under CommonPrefixes.

pub fn get_prefix(&self) -> &Option<String>

Use this parameter to select only those keys that begin with the specified prefix. You can use prefixes to separate a bucket into different groupings of keys. (You can think of using prefix to make groups in the same way that you'd use a folder in a file system.) You can use prefix with delimiter to roll up numerous objects into a single result under CommonPrefixes.

pub fn version_id_marker(self, input: impl Into<String>) -> Self

Specifies the object version you want to start listing from.

pub fn set_version_id_marker(self, input: Option<String>) -> Self

Specifies the object version you want to start listing from.

pub fn get_version_id_marker(&self) -> &Option<String>

Specifies the object version you want to start listing from.

pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn get_expected_bucket_owner(&self) -> &Option<String>

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn request_payer(self, input: RequestPayer) -> Self

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn set_request_payer(self, input: Option<RequestPayer>) -> Self

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn get_request_payer(&self) -> &Option<RequestPayer>

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

pub fn optional_object_attributes(self, input: OptionalObjectAttributes) -> Self

Appends an item to optional_object_attributes.

To override the contents of this collection use set_optional_object_attributes.

Specifies the optional fields that you want returned in the response. Fields that you do not specify are not returned.

pub fn set_optional_object_attributes( self, input: Option<Vec<OptionalObjectAttributes>>, ) -> Self

Specifies the optional fields that you want returned in the response. Fields that you do not specify are not returned.

pub fn get_optional_object_attributes( &self, ) -> &Option<Vec<OptionalObjectAttributes>>

Specifies the optional fields that you want returned in the response. Fields that you do not specify are not returned.

pub fn build(self) -> Result<ListObjectVersionsInput, BuildError>

Consumes the builder and constructs a ListObjectVersionsInput.

impl ListObjectVersionsInputBuilder

pub async fn send_with( self, client: &Client, ) -> Result<ListObjectVersionsOutput, SdkError<ListObjectVersionsError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for ListObjectVersionsInputBuilder

fn clone(&self) -> ListObjectVersionsInputBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ListObjectVersionsInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ListObjectVersionsInputBuilder

fn default() -> ListObjectVersionsInputBuilder

Returns the “default value” for a type.

impl PartialEq for ListObjectVersionsInputBuilder

fn eq(&self, other: &ListObjectVersionsInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for ListObjectVersionsInputBuilder