#[non_exhaustive]pub struct ListMultipartUploadsOutput {Show 13 fields
pub bucket: Option<String>,
pub key_marker: Option<String>,
pub upload_id_marker: Option<String>,
pub next_key_marker: Option<String>,
pub prefix: Option<String>,
pub delimiter: Option<String>,
pub next_upload_id_marker: Option<String>,
pub max_uploads: Option<i32>,
pub is_truncated: Option<bool>,
pub uploads: Option<Vec<MultipartUpload>>,
pub common_prefixes: Option<Vec<CommonPrefix>>,
pub encoding_type: Option<EncodingType>,
pub request_charged: Option<RequestCharged>,
/* private fields */
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.bucket: Option<String>
The name of the bucket to which the multipart upload was initiated. Does not return the access point ARN or access point alias if used.
key_marker: Option<String>
The key at or after which the listing began.
upload_id_marker: Option<String>
Together with key-marker, specifies the multipart upload after which listing should begin. If key-marker is not specified, the upload-id-marker parameter is ignored. Otherwise, any multipart uploads for a key equal to the key-marker might be included in the list only if they have an upload ID lexicographically greater than the specified upload-id-marker
.
This functionality is not supported for directory buckets.
next_key_marker: Option<String>
When a list is truncated, this element specifies the value that should be used for the key-marker request parameter in a subsequent request.
prefix: Option<String>
When a prefix is provided in the request, this field contains the specified prefix. The result contains only keys starting with the specified prefix.
Directory buckets - For directory buckets, only prefixes that end in a delimiter (/
) are supported.
delimiter: Option<String>
Contains the delimiter you specified in the request. If you don't specify a delimiter in your request, this element is absent from the response.
Directory buckets - For directory buckets, /
is the only supported delimiter.
next_upload_id_marker: Option<String>
When a list is truncated, this element specifies the value that should be used for the upload-id-marker
request parameter in a subsequent request.
This functionality is not supported for directory buckets.
max_uploads: Option<i32>
Maximum number of multipart uploads that could have been included in the response.
is_truncated: Option<bool>
Indicates whether the returned list of multipart uploads is truncated. A value of true indicates that the list was truncated. The list can be truncated if the number of multipart uploads exceeds the limit allowed or specified by max uploads.
uploads: Option<Vec<MultipartUpload>>
Container for elements related to a particular multipart upload. A response can contain zero or more Upload
elements.
common_prefixes: Option<Vec<CommonPrefix>>
If you specify a delimiter in the request, then the result returns each distinct key prefix containing the delimiter in a CommonPrefixes
element. The distinct key prefixes are returned in the Prefix
child element.
Directory buckets - For directory buckets, only prefixes that end in a delimiter (/
) are supported.
encoding_type: Option<EncodingType>
Encoding type used by Amazon S3 to encode object keys in the response.
If you specify the encoding-type
request parameter, Amazon S3 includes this element in the response, and returns encoded key name values in the following response elements:
Delimiter
, KeyMarker
, Prefix
, NextKeyMarker
, Key
.
request_charged: Option<RequestCharged>
If present, indicates that the requester was successfully charged for the request.
This functionality is not supported for directory buckets.
Implementations§
source§impl ListMultipartUploadsOutput
impl ListMultipartUploadsOutput
sourcepub fn bucket(&self) -> Option<&str>
pub fn bucket(&self) -> Option<&str>
The name of the bucket to which the multipart upload was initiated. Does not return the access point ARN or access point alias if used.
sourcepub fn key_marker(&self) -> Option<&str>
pub fn key_marker(&self) -> Option<&str>
The key at or after which the listing began.
sourcepub fn upload_id_marker(&self) -> Option<&str>
pub fn upload_id_marker(&self) -> Option<&str>
Together with key-marker, specifies the multipart upload after which listing should begin. If key-marker is not specified, the upload-id-marker parameter is ignored. Otherwise, any multipart uploads for a key equal to the key-marker might be included in the list only if they have an upload ID lexicographically greater than the specified upload-id-marker
.
This functionality is not supported for directory buckets.
sourcepub fn next_key_marker(&self) -> Option<&str>
pub fn next_key_marker(&self) -> Option<&str>
When a list is truncated, this element specifies the value that should be used for the key-marker request parameter in a subsequent request.
sourcepub fn prefix(&self) -> Option<&str>
pub fn prefix(&self) -> Option<&str>
When a prefix is provided in the request, this field contains the specified prefix. The result contains only keys starting with the specified prefix.
Directory buckets - For directory buckets, only prefixes that end in a delimiter (/
) are supported.
sourcepub fn delimiter(&self) -> Option<&str>
pub fn delimiter(&self) -> Option<&str>
Contains the delimiter you specified in the request. If you don't specify a delimiter in your request, this element is absent from the response.
Directory buckets - For directory buckets, /
is the only supported delimiter.
sourcepub fn next_upload_id_marker(&self) -> Option<&str>
pub fn next_upload_id_marker(&self) -> Option<&str>
When a list is truncated, this element specifies the value that should be used for the upload-id-marker
request parameter in a subsequent request.
This functionality is not supported for directory buckets.
sourcepub fn max_uploads(&self) -> Option<i32>
pub fn max_uploads(&self) -> Option<i32>
Maximum number of multipart uploads that could have been included in the response.
sourcepub fn is_truncated(&self) -> Option<bool>
pub fn is_truncated(&self) -> Option<bool>
Indicates whether the returned list of multipart uploads is truncated. A value of true indicates that the list was truncated. The list can be truncated if the number of multipart uploads exceeds the limit allowed or specified by max uploads.
sourcepub fn uploads(&self) -> &[MultipartUpload]
pub fn uploads(&self) -> &[MultipartUpload]
Container for elements related to a particular multipart upload. A response can contain zero or more Upload
elements.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .uploads.is_none()
.
sourcepub fn common_prefixes(&self) -> &[CommonPrefix]
pub fn common_prefixes(&self) -> &[CommonPrefix]
If you specify a delimiter in the request, then the result returns each distinct key prefix containing the delimiter in a CommonPrefixes
element. The distinct key prefixes are returned in the Prefix
child element.
Directory buckets - For directory buckets, only prefixes that end in a delimiter (/
) are supported.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .common_prefixes.is_none()
.
sourcepub fn encoding_type(&self) -> Option<&EncodingType>
pub fn encoding_type(&self) -> Option<&EncodingType>
Encoding type used by Amazon S3 to encode object keys in the response.
If you specify the encoding-type
request parameter, Amazon S3 includes this element in the response, and returns encoded key name values in the following response elements:
Delimiter
, KeyMarker
, Prefix
, NextKeyMarker
, Key
.
sourcepub fn request_charged(&self) -> Option<&RequestCharged>
pub fn request_charged(&self) -> Option<&RequestCharged>
If present, indicates that the requester was successfully charged for the request.
This functionality is not supported for directory buckets.
source§impl ListMultipartUploadsOutput
impl ListMultipartUploadsOutput
sourcepub fn builder() -> ListMultipartUploadsOutputBuilder
pub fn builder() -> ListMultipartUploadsOutputBuilder
Creates a new builder-style object to manufacture ListMultipartUploadsOutput
.
Trait Implementations§
source§impl Clone for ListMultipartUploadsOutput
impl Clone for ListMultipartUploadsOutput
source§fn clone(&self) -> ListMultipartUploadsOutput
fn clone(&self) -> ListMultipartUploadsOutput
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresource§impl Debug for ListMultipartUploadsOutput
impl Debug for ListMultipartUploadsOutput
source§impl RequestId for ListMultipartUploadsOutput
impl RequestId for ListMultipartUploadsOutput
source§fn request_id(&self) -> Option<&str>
fn request_id(&self) -> Option<&str>
None
if the service could not be reached.source§impl RequestIdExt for ListMultipartUploadsOutput
impl RequestIdExt for ListMultipartUploadsOutput
source§fn extended_request_id(&self) -> Option<&str>
fn extended_request_id(&self) -> Option<&str>
impl StructuralPartialEq for ListMultipartUploadsOutput
Auto Trait Implementations§
impl Freeze for ListMultipartUploadsOutput
impl RefUnwindSafe for ListMultipartUploadsOutput
impl Send for ListMultipartUploadsOutput
impl Sync for ListMultipartUploadsOutput
impl Unpin for ListMultipartUploadsOutput
impl UnwindSafe for ListMultipartUploadsOutput
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§default unsafe fn clone_to_uninit(&self, dst: *mut T)
default unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit
)