Struct aws_sdk_s3::operation::get_object::builders::GetObjectFluentBuilder
source · pub struct GetObjectFluentBuilder { /* private fields */ }
Expand description
Fluent builder constructing a request to GetObject
.
Retrieves an object from Amazon S3.
In the GetObject
request, specify the full key name for the object.
General purpose buckets - Both the virtual-hosted-style requests and the path-style requests are supported. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg
, specify the object key name as /photos/2006/February/sample.jpg
. For a path-style request example, if you have the object photos/2006/February/sample.jpg
in the bucket named examplebucket
, specify the object key name as /examplebucket/photos/2006/February/sample.jpg
. For more information about request types, see HTTP Host Header Bucket Specification in the Amazon S3 User Guide.
Directory buckets - Only virtual-hosted-style requests are supported. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg
in the bucket named examplebucket--use1-az5--x-s3
, specify the object key name as /photos/2006/February/sample.jpg
. Also, when you make requests to this API operation, your requests are sent to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format https://bucket_name.s3express-az_id.region.amazonaws.com/key-name
. Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.
- Permissions
-
-
General purpose bucket permissions - You must have the required permissions in a policy. To use
GetObject
, you must have theREAD
access to the object (or version). If you grantREAD
access to the anonymous user, theGetObject
operation returns the object without using an authorization header. For more information, see Specifying permissions in a policy in the Amazon S3 User Guide.If you include a
versionId
in your request header, you must have thes3:GetObjectVersion
permission to access a specific version of an object. Thes3:GetObject
permission is not required in this scenario.If you request the current version of an object without a specific
versionId
in the request header, only thes3:GetObject
permission is required. Thes3:GetObjectVersion
permission is not required in this scenario.If the object that you request doesn’t exist, the error that Amazon S3 returns depends on whether you also have the
s3:ListBucket
permission.-
If you have the
s3:ListBucket
permission on the bucket, Amazon S3 returns an HTTP status code404 Not Found
error. -
If you don’t have the
s3:ListBucket
permission, Amazon S3 returns an HTTP status code403 Access Denied
error.
-
-
Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the
CreateSession
API operation for session-based authorization. Specifically, you grant thes3express:CreateSession
permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make theCreateSession
API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make anotherCreateSession
API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, seeCreateSession
.
-
- Storage classes
-
If the object you are retrieving is stored in the S3 Glacier Flexible Retrieval storage class, the S3 Glacier Deep Archive storage class, the S3 Intelligent-Tiering Archive Access tier, or the S3 Intelligent-Tiering Deep Archive Access tier, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this operation returns an
InvalidObjectState
error. For information about restoring archived objects, see Restoring Archived Objects in the Amazon S3 User Guide.Directory buckets - For directory buckets, only the S3 Express One Zone storage class is supported to store newly created objects. Unsupported storage class values won't write a destination object and will respond with the HTTP status code
400 Bad Request
. - Encryption
-
Encryption request headers, like
x-amz-server-side-encryption
, should not be sent for theGetObject
requests, if your object uses server-side encryption with Amazon S3 managed encryption keys (SSE-S3), server-side encryption with Key Management Service (KMS) keys (SSE-KMS), or dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS). If you include the header in yourGetObject
requests for the object that uses these types of keys, you’ll get an HTTP400 Bad Request
error. - Overriding response header values through the request
-
There are times when you want to override certain response header values of a
GetObject
response. For example, you might override theContent-Disposition
response header value through yourGetObject
request.You can override values for a set of response headers. These modified response header values are included only in a successful response, that is, when the HTTP status code
200 OK
is returned. The headers you can override using the following query parameters in the request are a subset of the headers that Amazon S3 accepts when you create an object.The response headers that you can override for the
GetObject
response areCache-Control
,Content-Disposition
,Content-Encoding
,Content-Language
,Content-Type
, andExpires
.To override values for a set of response headers in the
GetObject
response, you can use the following query parameters in the request.-
response-cache-control
-
response-content-disposition
-
response-content-encoding
-
response-content-language
-
response-content-type
-
response-expires
When you use these parameters, you must sign the request by using either an Authorization header or a presigned URL. These parameters cannot be used with an unsigned (anonymous) request.
-
- HTTP Host header syntax
-
Directory buckets - The HTTP Host header syntax is
Bucket_name.s3express-az_id.region.amazonaws.com
.
The following operations are related to GetObject
:
Implementations§
source§impl GetObjectFluentBuilder
impl GetObjectFluentBuilder
sourcepub fn as_input(&self) -> &GetObjectInputBuilder
pub fn as_input(&self) -> &GetObjectInputBuilder
Access the GetObject as a reference.
sourcepub async fn send(
self,
) -> Result<GetObjectOutput, SdkError<GetObjectError, HttpResponse>>
pub async fn send( self, ) -> Result<GetObjectOutput, SdkError<GetObjectError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn customize(
self,
) -> CustomizableOperation<GetObjectOutput, GetObjectError, Self>
pub fn customize( self, ) -> CustomizableOperation<GetObjectOutput, GetObjectError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
sourcepub async fn presigned(
self,
presigning_config: PresigningConfig,
) -> Result<PresignedRequest, SdkError<GetObjectError, HttpResponse>>
pub async fn presigned( self, presigning_config: PresigningConfig, ) -> Result<PresignedRequest, SdkError<GetObjectError, HttpResponse>>
Creates a presigned request for this operation.
The presigning_config
provides additional presigning-specific config values, such as the
amount of time the request should be valid for after creation.
Presigned requests can be given to other users or applications to access a resource or perform an operation without having access to the AWS security credentials.
Important: If you’re using credentials that can expire, such as those from STS AssumeRole or SSO, then the presigned request can only be valid for as long as the credentials used to create it are.
sourcepub fn bucket(self, input: impl Into<String>) -> Self
pub fn bucket(self, input: impl Into<String>) -> Self
The bucket name containing the object.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3
(for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Object Lambda access points - When you use this action with an Object Lambda access point, you must direct requests to the Object Lambda access point hostname. The Object Lambda access point hostname takes the form AccessPointName-AccountId.s3-object-lambda.Region.amazonaws.com.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn set_bucket(self, input: Option<String>) -> Self
pub fn set_bucket(self, input: Option<String>) -> Self
The bucket name containing the object.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3
(for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Object Lambda access points - When you use this action with an Object Lambda access point, you must direct requests to the Object Lambda access point hostname. The Object Lambda access point hostname takes the form AccessPointName-AccountId.s3-object-lambda.Region.amazonaws.com.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn get_bucket(&self) -> &Option<String>
pub fn get_bucket(&self) -> &Option<String>
The bucket name containing the object.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3
(for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Object Lambda access points - When you use this action with an Object Lambda access point, you must direct requests to the Object Lambda access point hostname. The Object Lambda access point hostname takes the form AccessPointName-AccountId.s3-object-lambda.Region.amazonaws.com.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn if_match(self, input: impl Into<String>) -> Self
pub fn if_match(self, input: impl Into<String>) -> Self
Return the object only if its entity tag (ETag) is the same as the one specified in this header; otherwise, return a 412 Precondition Failed
error.
If both of the If-Match
and If-Unmodified-Since
headers are present in the request as follows: If-Match
condition evaluates to true
, and; If-Unmodified-Since
condition evaluates to false
; then, S3 returns 200 OK
and the data requested.
For more information about conditional requests, see RFC 7232.
sourcepub fn set_if_match(self, input: Option<String>) -> Self
pub fn set_if_match(self, input: Option<String>) -> Self
Return the object only if its entity tag (ETag) is the same as the one specified in this header; otherwise, return a 412 Precondition Failed
error.
If both of the If-Match
and If-Unmodified-Since
headers are present in the request as follows: If-Match
condition evaluates to true
, and; If-Unmodified-Since
condition evaluates to false
; then, S3 returns 200 OK
and the data requested.
For more information about conditional requests, see RFC 7232.
sourcepub fn get_if_match(&self) -> &Option<String>
pub fn get_if_match(&self) -> &Option<String>
Return the object only if its entity tag (ETag) is the same as the one specified in this header; otherwise, return a 412 Precondition Failed
error.
If both of the If-Match
and If-Unmodified-Since
headers are present in the request as follows: If-Match
condition evaluates to true
, and; If-Unmodified-Since
condition evaluates to false
; then, S3 returns 200 OK
and the data requested.
For more information about conditional requests, see RFC 7232.
sourcepub fn if_modified_since(self, input: DateTime) -> Self
pub fn if_modified_since(self, input: DateTime) -> Self
Return the object only if it has been modified since the specified time; otherwise, return a 304 Not Modified
error.
If both of the If-None-Match
and If-Modified-Since
headers are present in the request as follows: If-None-Match
condition evaluates to false
, and; If-Modified-Since
condition evaluates to true
; then, S3 returns 304 Not Modified
status code.
For more information about conditional requests, see RFC 7232.
sourcepub fn set_if_modified_since(self, input: Option<DateTime>) -> Self
pub fn set_if_modified_since(self, input: Option<DateTime>) -> Self
Return the object only if it has been modified since the specified time; otherwise, return a 304 Not Modified
error.
If both of the If-None-Match
and If-Modified-Since
headers are present in the request as follows: If-None-Match
condition evaluates to false
, and; If-Modified-Since
condition evaluates to true
; then, S3 returns 304 Not Modified
status code.
For more information about conditional requests, see RFC 7232.
sourcepub fn get_if_modified_since(&self) -> &Option<DateTime>
pub fn get_if_modified_since(&self) -> &Option<DateTime>
Return the object only if it has been modified since the specified time; otherwise, return a 304 Not Modified
error.
If both of the If-None-Match
and If-Modified-Since
headers are present in the request as follows: If-None-Match
condition evaluates to false
, and; If-Modified-Since
condition evaluates to true
; then, S3 returns 304 Not Modified
status code.
For more information about conditional requests, see RFC 7232.
sourcepub fn if_none_match(self, input: impl Into<String>) -> Self
pub fn if_none_match(self, input: impl Into<String>) -> Self
Return the object only if its entity tag (ETag) is different from the one specified in this header; otherwise, return a 304 Not Modified
error.
If both of the If-None-Match
and If-Modified-Since
headers are present in the request as follows: If-None-Match
condition evaluates to false
, and; If-Modified-Since
condition evaluates to true
; then, S3 returns 304 Not Modified
HTTP status code.
For more information about conditional requests, see RFC 7232.
sourcepub fn set_if_none_match(self, input: Option<String>) -> Self
pub fn set_if_none_match(self, input: Option<String>) -> Self
Return the object only if its entity tag (ETag) is different from the one specified in this header; otherwise, return a 304 Not Modified
error.
If both of the If-None-Match
and If-Modified-Since
headers are present in the request as follows: If-None-Match
condition evaluates to false
, and; If-Modified-Since
condition evaluates to true
; then, S3 returns 304 Not Modified
HTTP status code.
For more information about conditional requests, see RFC 7232.
sourcepub fn get_if_none_match(&self) -> &Option<String>
pub fn get_if_none_match(&self) -> &Option<String>
Return the object only if its entity tag (ETag) is different from the one specified in this header; otherwise, return a 304 Not Modified
error.
If both of the If-None-Match
and If-Modified-Since
headers are present in the request as follows: If-None-Match
condition evaluates to false
, and; If-Modified-Since
condition evaluates to true
; then, S3 returns 304 Not Modified
HTTP status code.
For more information about conditional requests, see RFC 7232.
sourcepub fn if_unmodified_since(self, input: DateTime) -> Self
pub fn if_unmodified_since(self, input: DateTime) -> Self
Return the object only if it has not been modified since the specified time; otherwise, return a 412 Precondition Failed
error.
If both of the If-Match
and If-Unmodified-Since
headers are present in the request as follows: If-Match
condition evaluates to true
, and; If-Unmodified-Since
condition evaluates to false
; then, S3 returns 200 OK
and the data requested.
For more information about conditional requests, see RFC 7232.
sourcepub fn set_if_unmodified_since(self, input: Option<DateTime>) -> Self
pub fn set_if_unmodified_since(self, input: Option<DateTime>) -> Self
Return the object only if it has not been modified since the specified time; otherwise, return a 412 Precondition Failed
error.
If both of the If-Match
and If-Unmodified-Since
headers are present in the request as follows: If-Match
condition evaluates to true
, and; If-Unmodified-Since
condition evaluates to false
; then, S3 returns 200 OK
and the data requested.
For more information about conditional requests, see RFC 7232.
sourcepub fn get_if_unmodified_since(&self) -> &Option<DateTime>
pub fn get_if_unmodified_since(&self) -> &Option<DateTime>
Return the object only if it has not been modified since the specified time; otherwise, return a 412 Precondition Failed
error.
If both of the If-Match
and If-Unmodified-Since
headers are present in the request as follows: If-Match
condition evaluates to true
, and; If-Unmodified-Since
condition evaluates to false
; then, S3 returns 200 OK
and the data requested.
For more information about conditional requests, see RFC 7232.
sourcepub fn range(self, input: impl Into<String>) -> Self
pub fn range(self, input: impl Into<String>) -> Self
Downloads the specified byte range of an object. For more information about the HTTP Range header, see https://www.rfc-editor.org/rfc/rfc9110.html#name-range.
Amazon S3 doesn't support retrieving multiple ranges of data per GET
request.
sourcepub fn set_range(self, input: Option<String>) -> Self
pub fn set_range(self, input: Option<String>) -> Self
Downloads the specified byte range of an object. For more information about the HTTP Range header, see https://www.rfc-editor.org/rfc/rfc9110.html#name-range.
Amazon S3 doesn't support retrieving multiple ranges of data per GET
request.
sourcepub fn get_range(&self) -> &Option<String>
pub fn get_range(&self) -> &Option<String>
Downloads the specified byte range of an object. For more information about the HTTP Range header, see https://www.rfc-editor.org/rfc/rfc9110.html#name-range.
Amazon S3 doesn't support retrieving multiple ranges of data per GET
request.
sourcepub fn response_cache_control(self, input: impl Into<String>) -> Self
pub fn response_cache_control(self, input: impl Into<String>) -> Self
Sets the Cache-Control
header of the response.
sourcepub fn set_response_cache_control(self, input: Option<String>) -> Self
pub fn set_response_cache_control(self, input: Option<String>) -> Self
Sets the Cache-Control
header of the response.
sourcepub fn get_response_cache_control(&self) -> &Option<String>
pub fn get_response_cache_control(&self) -> &Option<String>
Sets the Cache-Control
header of the response.
sourcepub fn response_content_disposition(self, input: impl Into<String>) -> Self
pub fn response_content_disposition(self, input: impl Into<String>) -> Self
Sets the Content-Disposition
header of the response.
sourcepub fn set_response_content_disposition(self, input: Option<String>) -> Self
pub fn set_response_content_disposition(self, input: Option<String>) -> Self
Sets the Content-Disposition
header of the response.
sourcepub fn get_response_content_disposition(&self) -> &Option<String>
pub fn get_response_content_disposition(&self) -> &Option<String>
Sets the Content-Disposition
header of the response.
sourcepub fn response_content_encoding(self, input: impl Into<String>) -> Self
pub fn response_content_encoding(self, input: impl Into<String>) -> Self
Sets the Content-Encoding
header of the response.
sourcepub fn set_response_content_encoding(self, input: Option<String>) -> Self
pub fn set_response_content_encoding(self, input: Option<String>) -> Self
Sets the Content-Encoding
header of the response.
sourcepub fn get_response_content_encoding(&self) -> &Option<String>
pub fn get_response_content_encoding(&self) -> &Option<String>
Sets the Content-Encoding
header of the response.
sourcepub fn response_content_language(self, input: impl Into<String>) -> Self
pub fn response_content_language(self, input: impl Into<String>) -> Self
Sets the Content-Language
header of the response.
sourcepub fn set_response_content_language(self, input: Option<String>) -> Self
pub fn set_response_content_language(self, input: Option<String>) -> Self
Sets the Content-Language
header of the response.
sourcepub fn get_response_content_language(&self) -> &Option<String>
pub fn get_response_content_language(&self) -> &Option<String>
Sets the Content-Language
header of the response.
sourcepub fn response_content_type(self, input: impl Into<String>) -> Self
pub fn response_content_type(self, input: impl Into<String>) -> Self
Sets the Content-Type
header of the response.
sourcepub fn set_response_content_type(self, input: Option<String>) -> Self
pub fn set_response_content_type(self, input: Option<String>) -> Self
Sets the Content-Type
header of the response.
sourcepub fn get_response_content_type(&self) -> &Option<String>
pub fn get_response_content_type(&self) -> &Option<String>
Sets the Content-Type
header of the response.
sourcepub fn response_expires(self, input: DateTime) -> Self
pub fn response_expires(self, input: DateTime) -> Self
Sets the Expires
header of the response.
sourcepub fn set_response_expires(self, input: Option<DateTime>) -> Self
pub fn set_response_expires(self, input: Option<DateTime>) -> Self
Sets the Expires
header of the response.
sourcepub fn get_response_expires(&self) -> &Option<DateTime>
pub fn get_response_expires(&self) -> &Option<DateTime>
Sets the Expires
header of the response.
sourcepub fn version_id(self, input: impl Into<String>) -> Self
pub fn version_id(self, input: impl Into<String>) -> Self
Version ID used to reference a specific version of the object.
By default, the GetObject
operation returns the current version of an object. To return a different version, use the versionId
subresource.
-
If you include a
versionId
in your request header, you must have thes3:GetObjectVersion
permission to access a specific version of an object. Thes3:GetObject
permission is not required in this scenario. -
If you request the current version of an object without a specific
versionId
in the request header, only thes3:GetObject
permission is required. Thes3:GetObjectVersion
permission is not required in this scenario. -
Directory buckets - S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the
null
value of the version ID is supported by directory buckets. You can only specifynull
to theversionId
query parameter in the request.
For more information about versioning, see PutBucketVersioning.
sourcepub fn set_version_id(self, input: Option<String>) -> Self
pub fn set_version_id(self, input: Option<String>) -> Self
Version ID used to reference a specific version of the object.
By default, the GetObject
operation returns the current version of an object. To return a different version, use the versionId
subresource.
-
If you include a
versionId
in your request header, you must have thes3:GetObjectVersion
permission to access a specific version of an object. Thes3:GetObject
permission is not required in this scenario. -
If you request the current version of an object without a specific
versionId
in the request header, only thes3:GetObject
permission is required. Thes3:GetObjectVersion
permission is not required in this scenario. -
Directory buckets - S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the
null
value of the version ID is supported by directory buckets. You can only specifynull
to theversionId
query parameter in the request.
For more information about versioning, see PutBucketVersioning.
sourcepub fn get_version_id(&self) -> &Option<String>
pub fn get_version_id(&self) -> &Option<String>
Version ID used to reference a specific version of the object.
By default, the GetObject
operation returns the current version of an object. To return a different version, use the versionId
subresource.
-
If you include a
versionId
in your request header, you must have thes3:GetObjectVersion
permission to access a specific version of an object. Thes3:GetObject
permission is not required in this scenario. -
If you request the current version of an object without a specific
versionId
in the request header, only thes3:GetObject
permission is required. Thes3:GetObjectVersion
permission is not required in this scenario. -
Directory buckets - S3 Versioning isn't enabled and supported for directory buckets. For this API operation, only the
null
value of the version ID is supported by directory buckets. You can only specifynull
to theversionId
query parameter in the request.
For more information about versioning, see PutBucketVersioning.
sourcepub fn sse_customer_algorithm(self, input: impl Into<String>) -> Self
pub fn sse_customer_algorithm(self, input: impl Into<String>) -> Self
Specifies the algorithm to use when decrypting the object (for example, AES256
).
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:
-
x-amz-server-side-encryption-customer-algorithm
-
x-amz-server-side-encryption-customer-key
-
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn set_sse_customer_algorithm(self, input: Option<String>) -> Self
pub fn set_sse_customer_algorithm(self, input: Option<String>) -> Self
Specifies the algorithm to use when decrypting the object (for example, AES256
).
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:
-
x-amz-server-side-encryption-customer-algorithm
-
x-amz-server-side-encryption-customer-key
-
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn get_sse_customer_algorithm(&self) -> &Option<String>
pub fn get_sse_customer_algorithm(&self) -> &Option<String>
Specifies the algorithm to use when decrypting the object (for example, AES256
).
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:
-
x-amz-server-side-encryption-customer-algorithm
-
x-amz-server-side-encryption-customer-key
-
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn sse_customer_key(self, input: impl Into<String>) -> Self
pub fn sse_customer_key(self, input: impl Into<String>) -> Self
Specifies the customer-provided encryption key that you originally provided for Amazon S3 to encrypt the data before storing it. This value is used to decrypt the object when recovering it and must match the one used when storing the data. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm
header.
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:
-
x-amz-server-side-encryption-customer-algorithm
-
x-amz-server-side-encryption-customer-key
-
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn set_sse_customer_key(self, input: Option<String>) -> Self
pub fn set_sse_customer_key(self, input: Option<String>) -> Self
Specifies the customer-provided encryption key that you originally provided for Amazon S3 to encrypt the data before storing it. This value is used to decrypt the object when recovering it and must match the one used when storing the data. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm
header.
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:
-
x-amz-server-side-encryption-customer-algorithm
-
x-amz-server-side-encryption-customer-key
-
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn get_sse_customer_key(&self) -> &Option<String>
pub fn get_sse_customer_key(&self) -> &Option<String>
Specifies the customer-provided encryption key that you originally provided for Amazon S3 to encrypt the data before storing it. This value is used to decrypt the object when recovering it and must match the one used when storing the data. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm
header.
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:
-
x-amz-server-side-encryption-customer-algorithm
-
x-amz-server-side-encryption-customer-key
-
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn sse_customer_key_md5(self, input: impl Into<String>) -> Self
pub fn sse_customer_key_md5(self, input: impl Into<String>) -> Self
Specifies the 128-bit MD5 digest of the customer-provided encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:
-
x-amz-server-side-encryption-customer-algorithm
-
x-amz-server-side-encryption-customer-key
-
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn set_sse_customer_key_md5(self, input: Option<String>) -> Self
pub fn set_sse_customer_key_md5(self, input: Option<String>) -> Self
Specifies the 128-bit MD5 digest of the customer-provided encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:
-
x-amz-server-side-encryption-customer-algorithm
-
x-amz-server-side-encryption-customer-key
-
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn get_sse_customer_key_md5(&self) -> &Option<String>
pub fn get_sse_customer_key_md5(&self) -> &Option<String>
Specifies the 128-bit MD5 digest of the customer-provided encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:
-
x-amz-server-side-encryption-customer-algorithm
-
x-amz-server-side-encryption-customer-key
-
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn request_payer(self, input: RequestPayer) -> Self
pub fn request_payer(self, input: RequestPayer) -> Self
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn set_request_payer(self, input: Option<RequestPayer>) -> Self
pub fn set_request_payer(self, input: Option<RequestPayer>) -> Self
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn get_request_payer(&self) -> &Option<RequestPayer>
pub fn get_request_payer(&self) -> &Option<RequestPayer>
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn part_number(self, input: i32) -> Self
pub fn part_number(self, input: i32) -> Self
Part number of the object being read. This is a positive integer between 1 and 10,000. Effectively performs a 'ranged' GET request for the part specified. Useful for downloading just a part of an object.
sourcepub fn set_part_number(self, input: Option<i32>) -> Self
pub fn set_part_number(self, input: Option<i32>) -> Self
Part number of the object being read. This is a positive integer between 1 and 10,000. Effectively performs a 'ranged' GET request for the part specified. Useful for downloading just a part of an object.
sourcepub fn get_part_number(&self) -> &Option<i32>
pub fn get_part_number(&self) -> &Option<i32>
Part number of the object being read. This is a positive integer between 1 and 10,000. Effectively performs a 'ranged' GET request for the part specified. Useful for downloading just a part of an object.
sourcepub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn get_expected_bucket_owner(&self) -> &Option<String>
pub fn get_expected_bucket_owner(&self) -> &Option<String>
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn checksum_mode(self, input: ChecksumMode) -> Self
pub fn checksum_mode(self, input: ChecksumMode) -> Self
To retrieve the checksum, this mode must be enabled.
sourcepub fn set_checksum_mode(self, input: Option<ChecksumMode>) -> Self
pub fn set_checksum_mode(self, input: Option<ChecksumMode>) -> Self
To retrieve the checksum, this mode must be enabled.
sourcepub fn get_checksum_mode(&self) -> &Option<ChecksumMode>
pub fn get_checksum_mode(&self) -> &Option<ChecksumMode>
To retrieve the checksum, this mode must be enabled.
Trait Implementations§
source§impl Clone for GetObjectFluentBuilder
impl Clone for GetObjectFluentBuilder
source§fn clone(&self) -> GetObjectFluentBuilder
fn clone(&self) -> GetObjectFluentBuilder
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreAuto Trait Implementations§
impl Freeze for GetObjectFluentBuilder
impl !RefUnwindSafe for GetObjectFluentBuilder
impl Send for GetObjectFluentBuilder
impl Sync for GetObjectFluentBuilder
impl Unpin for GetObjectFluentBuilder
impl !UnwindSafe for GetObjectFluentBuilder
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§default unsafe fn clone_to_uninit(&self, dst: *mut T)
default unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit
)