pub struct DeleteObjectsFluentBuilder { /* private fields */ }
Expand description
Fluent builder constructing a request to DeleteObjects
.
This operation enables you to delete multiple objects from a bucket using a single HTTP request. If you know the object keys that you want to delete, then this operation provides a suitable alternative to sending individual delete requests, reducing per-request overhead.
The request can contain a list of up to 1000 keys that you want to delete. In the XML, you provide the object key names, and optionally, version IDs if you want to delete a specific version of the object from a versioning-enabled bucket. For each key, Amazon S3 performs a delete operation and returns the result of that delete, success or failure, in the response. Note that if the object specified in the request is not found, Amazon S3 returns the result as deleted.
-
Directory buckets - S3 Versioning isn't enabled and supported for directory buckets.
-
Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format
https://bucket_name.s3express-az_id.region.amazonaws.com/key-name
. Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.
The operation supports two modes for the response: verbose and quiet. By default, the operation uses verbose mode in which the response includes the result of deletion of each key in your request. In quiet mode the response includes only keys where the delete operation encountered an error. For a successful deletion in a quiet mode, the operation does not return any information about the delete in the response body.
When performing this action on an MFA Delete enabled bucket, that attempts to delete any versioned objects, you must include an MFA token. If you do not provide one, the entire request will fail, even if there are non-versioned objects you are trying to delete. If you provide an invalid token, whether there are versioned keys in the request or not, the entire Multi-Object Delete request will fail. For information about MFA Delete, see MFA Delete in the Amazon S3 User Guide.
Directory buckets - MFA delete is not supported by directory buckets.
- Permissions
-
-
General purpose bucket permissions - The following permissions are required in your policies when your
DeleteObjects
request includes specific headers.-
s3:DeleteObject
- To delete an object from a bucket, you must always specify thes3:DeleteObject
permission. -
s3:DeleteObjectVersion
- To delete a specific version of an object from a versiong-enabled bucket, you must specify thes3:DeleteObjectVersion
permission.
-
-
Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the
CreateSession
API operation for session-based authorization. Specifically, you grant thes3express:CreateSession
permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make theCreateSession
API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make anotherCreateSession
API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, seeCreateSession
.
-
- Content-MD5 request header
-
-
General purpose bucket - The Content-MD5 request header is required for all Multi-Object Delete requests. Amazon S3 uses the header value to ensure that your request body has not been altered in transit.
-
Directory bucket - The Content-MD5 request header or a additional checksum request header (including
x-amz-checksum-crc32
,x-amz-checksum-crc32c
,x-amz-checksum-sha1
, orx-amz-checksum-sha256
) is required for all Multi-Object Delete requests.
-
- HTTP Host header syntax
-
Directory buckets - The HTTP Host header syntax is
Bucket_name.s3express-az_id.region.amazonaws.com
.
The following operations are related to DeleteObjects
:
Implementations§
source§impl DeleteObjectsFluentBuilder
impl DeleteObjectsFluentBuilder
sourcepub fn as_input(&self) -> &DeleteObjectsInputBuilder
pub fn as_input(&self) -> &DeleteObjectsInputBuilder
Access the DeleteObjects as a reference.
sourcepub async fn send(
self,
) -> Result<DeleteObjectsOutput, SdkError<DeleteObjectsError, HttpResponse>>
pub async fn send( self, ) -> Result<DeleteObjectsOutput, SdkError<DeleteObjectsError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn customize(
self,
) -> CustomizableOperation<DeleteObjectsOutput, DeleteObjectsError, Self>
pub fn customize( self, ) -> CustomizableOperation<DeleteObjectsOutput, DeleteObjectsError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
sourcepub fn bucket(self, input: impl Into<String>) -> Self
pub fn bucket(self, input: impl Into<String>) -> Self
The bucket name containing the objects to delete.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3
(for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn set_bucket(self, input: Option<String>) -> Self
pub fn set_bucket(self, input: Option<String>) -> Self
The bucket name containing the objects to delete.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3
(for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn get_bucket(&self) -> &Option<String>
pub fn get_bucket(&self) -> &Option<String>
The bucket name containing the objects to delete.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3
(for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
sourcepub fn set_delete(self, input: Option<Delete>) -> Self
pub fn set_delete(self, input: Option<Delete>) -> Self
Container for the request.
sourcepub fn get_delete(&self) -> &Option<Delete>
pub fn get_delete(&self) -> &Option<Delete>
Container for the request.
sourcepub fn mfa(self, input: impl Into<String>) -> Self
pub fn mfa(self, input: impl Into<String>) -> Self
The concatenation of the authentication device's serial number, a space, and the value that is displayed on your authentication device. Required to permanently delete a versioned object if versioning is configured with MFA delete enabled.
When performing the DeleteObjects
operation on an MFA delete enabled bucket, which attempts to delete the specified versioned objects, you must include an MFA token. If you don't provide an MFA token, the entire request will fail, even if there are non-versioned objects that you are trying to delete. If you provide an invalid token, whether there are versioned object keys in the request or not, the entire Multi-Object Delete request will fail. For information about MFA Delete, see MFA Delete in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn set_mfa(self, input: Option<String>) -> Self
pub fn set_mfa(self, input: Option<String>) -> Self
The concatenation of the authentication device's serial number, a space, and the value that is displayed on your authentication device. Required to permanently delete a versioned object if versioning is configured with MFA delete enabled.
When performing the DeleteObjects
operation on an MFA delete enabled bucket, which attempts to delete the specified versioned objects, you must include an MFA token. If you don't provide an MFA token, the entire request will fail, even if there are non-versioned objects that you are trying to delete. If you provide an invalid token, whether there are versioned object keys in the request or not, the entire Multi-Object Delete request will fail. For information about MFA Delete, see MFA Delete in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn get_mfa(&self) -> &Option<String>
pub fn get_mfa(&self) -> &Option<String>
The concatenation of the authentication device's serial number, a space, and the value that is displayed on your authentication device. Required to permanently delete a versioned object if versioning is configured with MFA delete enabled.
When performing the DeleteObjects
operation on an MFA delete enabled bucket, which attempts to delete the specified versioned objects, you must include an MFA token. If you don't provide an MFA token, the entire request will fail, even if there are non-versioned objects that you are trying to delete. If you provide an invalid token, whether there are versioned object keys in the request or not, the entire Multi-Object Delete request will fail. For information about MFA Delete, see MFA Delete in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn request_payer(self, input: RequestPayer) -> Self
pub fn request_payer(self, input: RequestPayer) -> Self
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn set_request_payer(self, input: Option<RequestPayer>) -> Self
pub fn set_request_payer(self, input: Option<RequestPayer>) -> Self
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn get_request_payer(&self) -> &Option<RequestPayer>
pub fn get_request_payer(&self) -> &Option<RequestPayer>
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
sourcepub fn bypass_governance_retention(self, input: bool) -> Self
pub fn bypass_governance_retention(self, input: bool) -> Self
Specifies whether you want to delete this object even if it has a Governance-type Object Lock in place. To use this header, you must have the s3:BypassGovernanceRetention
permission.
This functionality is not supported for directory buckets.
sourcepub fn set_bypass_governance_retention(self, input: Option<bool>) -> Self
pub fn set_bypass_governance_retention(self, input: Option<bool>) -> Self
Specifies whether you want to delete this object even if it has a Governance-type Object Lock in place. To use this header, you must have the s3:BypassGovernanceRetention
permission.
This functionality is not supported for directory buckets.
sourcepub fn get_bypass_governance_retention(&self) -> &Option<bool>
pub fn get_bypass_governance_retention(&self) -> &Option<bool>
Specifies whether you want to delete this object even if it has a Governance-type Object Lock in place. To use this header, you must have the s3:BypassGovernanceRetention
permission.
This functionality is not supported for directory buckets.
sourcepub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn get_expected_bucket_owner(&self) -> &Option<String>
pub fn get_expected_bucket_owner(&self) -> &Option<String>
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden
(access denied).
sourcepub fn checksum_algorithm(self, input: ChecksumAlgorithm) -> Self
pub fn checksum_algorithm(self, input: ChecksumAlgorithm) -> Self
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum-algorithm
or x-amz-trailer
header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request
.
For the x-amz-checksum-algorithm
header, replace algorithm
with the supported algorithm from the following list:
-
CRC32
-
CRC32C
-
SHA1
-
SHA256
For more information, see Checking object integrity in the Amazon S3 User Guide.
If the individual checksum value you provide through x-amz-checksum-algorithm
doesn't match the checksum algorithm you set through x-amz-sdk-checksum-algorithm
, Amazon S3 ignores any provided ChecksumAlgorithm
parameter and uses the checksum algorithm that matches the provided value in x-amz-checksum-algorithm
.
If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm
parameter.
sourcepub fn set_checksum_algorithm(self, input: Option<ChecksumAlgorithm>) -> Self
pub fn set_checksum_algorithm(self, input: Option<ChecksumAlgorithm>) -> Self
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum-algorithm
or x-amz-trailer
header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request
.
For the x-amz-checksum-algorithm
header, replace algorithm
with the supported algorithm from the following list:
-
CRC32
-
CRC32C
-
SHA1
-
SHA256
For more information, see Checking object integrity in the Amazon S3 User Guide.
If the individual checksum value you provide through x-amz-checksum-algorithm
doesn't match the checksum algorithm you set through x-amz-sdk-checksum-algorithm
, Amazon S3 ignores any provided ChecksumAlgorithm
parameter and uses the checksum algorithm that matches the provided value in x-amz-checksum-algorithm
.
If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm
parameter.
sourcepub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>
pub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum-algorithm
or x-amz-trailer
header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request
.
For the x-amz-checksum-algorithm
header, replace algorithm
with the supported algorithm from the following list:
-
CRC32
-
CRC32C
-
SHA1
-
SHA256
For more information, see Checking object integrity in the Amazon S3 User Guide.
If the individual checksum value you provide through x-amz-checksum-algorithm
doesn't match the checksum algorithm you set through x-amz-sdk-checksum-algorithm
, Amazon S3 ignores any provided ChecksumAlgorithm
parameter and uses the checksum algorithm that matches the provided value in x-amz-checksum-algorithm
.
If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm
parameter.
Trait Implementations§
source§impl Clone for DeleteObjectsFluentBuilder
impl Clone for DeleteObjectsFluentBuilder
source§fn clone(&self) -> DeleteObjectsFluentBuilder
fn clone(&self) -> DeleteObjectsFluentBuilder
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreAuto Trait Implementations§
impl Freeze for DeleteObjectsFluentBuilder
impl !RefUnwindSafe for DeleteObjectsFluentBuilder
impl Send for DeleteObjectsFluentBuilder
impl Sync for DeleteObjectsFluentBuilder
impl Unpin for DeleteObjectsFluentBuilder
impl !UnwindSafe for DeleteObjectsFluentBuilder
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§default unsafe fn clone_to_uninit(&self, dst: *mut T)
default unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit
)